Datasheet

E2E
5
Accessories (Sold separately)
Sensor I/O Connector (Socket on One Cable End)
A Sensor I/O Connector is not provided with the Sensor. It must be ordered separately as required.
[Refer to Dimensions on page 16.]
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required.
[Refer to Dimensions on page 15.]
Nut Set
A Nut Set is included with the Sensor. Order a Nut Set when required, e.g., if you lose the nuts.
Protective Stainless-steel Spiral Tube against Wire Breakage
A Spiral Tube is not provided with the Sensor. It must be ordered separately as required.
[Refer to Dimensions on page 16.]
Size
Cable
specifications
Number of cable
wires (conductors)
Cable length L (m)
Straight Right-angle
Model
M8
Robot (bending-
resistant) cable
3
2 XS3F-M321-302-R XS3F-M322-302-R
5 XS3F-M321-305-R XS3F-M322-305-R
Applicable
Sensors
Appearance
Model Quantity Remarks
E2E-C03@ Y92E-SC03 1
Mounting block for 3 dia., M3-20 Hexagon socket head cap screws:
2pieces, M3 × P0.5 Hexagon nuts: 2pieces, Washers: 2pieces
E2E-C04@ Y92E-SC04 1
Mounting block for 4 dia., M3-20 Hexagon socket head cap screws:
2pieces, M3 × P0.5 Hexagon nuts: 2pieces, Washers: 2pieces
E2E-C05@ Y92E-SC05 1
Mounting block for 5.4 dia., M3-20 Hexagon socket head cap screws:
2 pieces, M3 × P0.5 Hexagon nuts: 2 pieces, Washers: 2 pieces
E2E-C06@ Y92E-SC06 1
Mounting block for 6.5 dia., M3-20 Hexagon socket head cap screws:
2pieces, M3 × P0.5 Hexagon nuts: 2pieces, Washers: 2pieces
E2E-S04@ Y92E-SS04 1 L-shaped Mounting Bracket for M4 screws
E2E-S05@ Y92E-SS05 1 L-shaped Mounting Bracket for M5 screws
Applicable Sensors Model
Applicable sensor outer
diameter
Set contents
E2E-S04@ Y92E-NWS04 M4
Clamping nuts: 2 pieces, toothed washer: 1 piece
E2E-S05@ Y92E-NWS05 M5
Applicable Sensors Model
Applicable sensor outer
diameter
Length
E2E-S04@
Y92E-STS04-05
M4
0.5 m
Y92E-STS04-10
1 m
E2E-S05@
Y92E-STS05-05
M5
0.5 m
Y92E-STS05-10
1 m