Datasheet

1
Small-diameter Proximity Sensor
E2E
Ultra small size and simple to install!
• With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of
108 model variations are available.
• High-speed response frequency stably detects moving
objects: 5 kHz max.
•
Four indicator LEDs for easier indicator positioning.
• Special mounting brackets reduce time and efforts for
installation.
•
Stainless-steel Spiral Tube protects against wire
breakage is available (M4, M5 only).
• Models also available with standard cables that are 5 m long
or with robot (bending-resistant) cables.
Features
Lineup of global small-diameter types (3 dia., 4 dia., 5.4 dia., 6.5 dia., M4, M5)
• A lineup of unshielded models for long distance sensing is also available. Stable long distance sensing performance enables worry-free use
even when the work flow is unsteady.
Bright operation indicators make it easy to view
operation status
•
Four indicator LEDs in a 360 degree layout can be easily seen.
High-speed response enables sharp detection timing
• 5 kHz response frequency max.
Protection circuits prevent failures due to wiring mistakes.
• Load short-circuit protection and output reverse polarity protection
circuits are incorporated.
Low current consumption: 10 mA max.
•
Current consumption is 2/3 that of conventional small diameter
proximity sensors.
Protec
tive Stainless-steel Spiral Tubes
available
• Lineup of protective tubes for M4 and M5 sizes. Reduces wire
breakage due to catching and shock.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Refer to Safety Precautions on page 10.