Datasheet

E2A-4
5
Mounting
The Proximity Sensor must not be subjected to excessive
shock with a hammer when it is installed, otherwise the
Proximity Sensor maybe damaged or loses its water-
resistance.
Do not tighten the nut with excessive force. A washer must be
used with the nut.
Accessories
Maintenance and Inspection
Periodically perform the following checks to ensure stable
operation of the Proximity Sensor over a long period of time.
1. Check for mounting position, dislocation, looseness, or
distortion of the Proximity Sensor and sensing objects.
2. Check for loose wiring and connections, improper contacts,
and line breakage.
3. Check for attachment or accumulation of metal powder or
dust.
4. Check for abnormal temperature conditions and other
environmental conditions.
5. Check for proper lighting of indicators (for models with a set
indicator).
Never attempt to disassemble or repair the Sensor.
Environment
Water Resistivity
The Proximity Sensors are tested intensively on water
resistance, but to ensure maximum performance and life
expectancy, avoid immersion in water and provide protection
from rain or snow.
Operating Environment
Store and operate the Proximity Sensor only within the given
specifications.
Inrush Current
A load that has a large inrush current (e.g., a lamp or motor)
will damage the Proximity Sensor. Connect the load to the
Proximity Sensor through a relay
<SUITABILITY FOR USE>
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination
of the products in the customer’s application or use of the products. Take all necessary steps to determine the suitability
of the product for the systems, machines, and equipment with which it will be used.
<CHANGE IN SPECIFICATIONS>
Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult
with your OMRON representative at any time to confirm actual specifications of purchased product.
Notes
APPLICATION CONSIDERATIONS
1) READ AND UNDERSTAND THIS SPECIFICATION
SHEET
Please read and understand this sheet before purchasing the
products. Please consult your OMRON representative if you
have any questions or comments.
2) WARRANTY
OMRON's exclusive warranty is that the products are free
from defects in materials and workmanship for a period of one
year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, REGARDING NON-
INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY
BUYER OR USER ACKNOWLEDGES THAT THE BUYER
OR USER ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS
OF THEIR INTENDED USE. OMRON DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED.
3) LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF
Type Torque
M12 30 Nm
Clamping nut
Material Brass-nickel plated
Number 2 pcs.
D16E-EN-01+E2A-4+Datasheet.fm Seite 5 Montag, 3. September 2012 5:23 17