Datasheet

D4MC
D4MC
6
One-way Action Short Hinge Roller Lever
D4MC-3030
Mounting Holes
Two 4.3 dia. mounting holes or
M4 screw holes
25.4 ± 0.15
Note: 1. Stainless steel lever
2. Plastic roller
12.7 dia. ×
7.5
(see note 2)
t = 1
(see note 1)
Terminal
protective
cover
Two, 4.3±0.1 dia.
mounting holes
Seal rubber (NBR)
Angle of roller
swing: 90°
(21 x 21)
22 max.
15
14
Molded Terminal Models
Molded Terminal Models
The molded terminal model is available with right-hand, left-hand and underside leads and is recommended for use where the Switch is ex -
posed
to dust, oil, or moisture.
(2)
(3)
(1)
When placing your order for the Switch specify the required length
of V .C.T . cable in addition to the model number of the Switch
Example:
Standard type: D4MC-5040
Location of lead outlet: Underside
Length of lead: 1 m (V .C.T . lead)
When placing your order for the above Switch specify the model
number
as D4MC-5043 (V .C.T 1 m)
Suffix by Location of Lead Outlet
Location of lead outlet Model
COM, NC, and NO
Right-hand D4MC-jjj1
Left-hand D4MC-jjj2
Underside D4MC-jjj3
Leads Supplied
Leads Nominal
cross-sectional
area
Finished outside diameter Terminal
connections
Standard length
V.C.T . (V inyl cabtire cable) 1.25 mm
2
T riple conductor: 10.5 mm dia. Black: COM
White: NO
Red: NC
1, 3, 5 m
Terminal Protective Cover
ZC55 Terminal Cover (ZC55-0002H):
The following three parts are supplied as a set.
Rubber packing
Terminal cover Seal rubber
ZC Seal Rubber (SC-1404C)