Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationSoftware On Cd

1CPU Units and Expansion Units

CP1L

CPU Units and Expansion Units

When it comes to controllers for compact machines,

Omron's new CP1L series offers the compactness of

a micro-PLC with the capability of a modular PLC.

But this new and exciting range is not only compact, it

is scaleable, has a faster processing speed than other

controllers and is in a class of its own when it comes

to price/performance. Naturally, it is compatible with

all other devices in the Omron PLC line up.

• 4 high-speed encoder inputs and 2 high-speed

pulse outputs

• CPUs with AC or DC supply and 14, 20, 30 or

40 I/O built-in

• Instruction set compatible with CP1H-, CJ1-,

and CS1 series PLC

• Optional RS232C and RS-422A/485 serial ports

• USB programming port

• Scaleable with a wide range of I/O units

(maximum up to 160 I/O points)

• Motion functionality

• One and the same software as other Omron

controllers

Note: The above values are for a cold start at room temperature for an AC power supply, and for a cold start for a DC power supply.

• A thermistor (with low-temperature current suppression characteristics) is used in the inrush current control circuitry for the AC power supply. The thermistor

will not be sufficiently cooled if the ambient temperature is high or if a hot start is performed when the power supply has been OFF for only a short time. In

those cases the inrush current values may be higher (as much as two times higher) than those shown above. Always allow for this when selecting fuses and

breakers for external circuits.

• A capacitor charge-type delay circuit is used in the inrush current control circuitry for the DC power supply. The capacitor will not be charged if a hot start is

performed when the power supply has been OFF for only a short time, so in those cases the inrush current values may be higher (as much as two times

higher) than those shown above.

CPU Unit Specification

Type AC power supply models DC power supply models

Item Model CP1L-@@@-A CP1L-@@@-D

Power supply 100 to 240 VAC 50/60 Hz 24 VDC

Operating voltage range 85 to 264 VAC 20.4 to 26.4 VDC

Power consumption 50 VA max. (CP1L-M40/M30DR-A) (See next page.)

30 VA max. (CP1L-L20/L14DR-A)

20 W max. (CP1L-M40/M30@@-D) (See next page.)

13 W max. (CP1L-L20/L14@@-D)

Inrush current (See note.) 100 to 120 VAC inputs:

20 A max. (for cold start at room temperature)

8 ms max.

200 to 240 VAC inputs:

40 A max. (for cold start at room temperature), 8 ms max.

30 A max. (for cold start at room temperature)

20 ms max.

External power supply 300 mA at 24 VDC (CP1L-M30/M40)

200 mA at 24 VDC (CP1L-L14/L20)

None

Insulation resistance 20 M min. (at 500 VDC) between the external AC terminals and

GR terminals

No insulation between primary and secondary for DC power

supply

Dielectric strength 2,300 VAC at 50/60 Hz for 1 min between the external AC and

GR terminals, leakage current: 5 mA max.

No insulation between primary and secondary for DC power

supply

Noise immunity Conforms to IEC 61000-4-4. 2 kV (power supply line)

Vibration resistance Conforms to JIS C0040. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s

in X, Y, and Z directions for

80 minutes each. Sweep time: 8 minutes x 10 sweeps = total time of 80 minutes)

Shock resistance Conforms to JIS C0041. 147 m/s

three times each in X, Y, and Z directions

Ambient operating

temperature

0 to 55C

Ambient humidity 10% to 90% (with no condensation)

Ambient operating

environment

No corrosive gas

Ambient storage temperature -20 to 75C (Excluding battery.)

Power holding time 10 ms min. 2 ms min.

Summary of content (16 pages)

PAGE 1
CP1L CPU Units and Expansion Units When it comes to controllers for compact machines, Omron's new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. But this new and exciting range is not only compact, it is scaleable, has a faster processing speed than other controllers and is in a class of its own when it comes to price/performance. Naturally, it is compatible with all other devices in the Omron PLC line up.
PAGE 2
Current Consumption The power consumption shown on page 1 is the maximum power consumption. To obtain the correct power consumption for the system configuration, calculate the power consumption for the external power supply from the current consumption given below for the CPU Unit, Expansion Units, and Expansion I/O Units. CPU Units Model Current consumption 5 VDC 0.22 A 0.22 A 0.31 A 0.31 A 0.21 A 0.21 A 0.28A 0.28 A 0.20 A 0.20A 0.24 A 0.24 A 0.18 A 0.18 A 0.21 A 0.
PAGE 3
CPU Units Type CP1L-M40 (40 points) CP1L-M30 (30 points) CP1L-L20 (20 points) CP1L-L14 (14 points) Models CP1L-M40@@-@ CP1L-M30@@-@ CP1L-L20@@-@ CP1L-L14@@-@ Stored program method Cyclic scan with immediate refreshing Ladder diagram Maximum number of function block definitions: 128 Maximum number of instances: 256 Languages usable in function block definitions: Ladder diagrams, structured text (ST) Instruction length 1 to 7 steps per instruction Instructions Approx.
PAGE 4
Input Terminal Block Arrangement (Top Block) CP1L-M40 CP1L-L20 · AC Power Supply Models · AC Power Supply Models L1 L2/N COM 01 00 03 02 05 04 07 06 09 08 11 10 Inputs (CIO 0) 01 00 03 02 05 04 07 06 09 08 11 − COM NC 01 00 00 10 02 05 04 07 06 09 08 11 10 01 00 03 02 05 04 07 06 09 08 11 + − COM NC 10 02 01 00 05 04 07 06 09 08 11 10 03 02 05 04 07 06 09 08 11 10 Inputs (CIO 0) Inputs (CIO 1) CP1L-L14 · AC Power Supply Models · AC Power Supply Models
PAGE 5
Output Terminal Block Arrangement (Bottom Block) CP1L-M40 CP1L-L20 · AC Power Supply Models · AC Power Supply Models + 00 − 01 02 03 04 COM COM COM COM 06 05 00 07 CIO 100 01 03 COM 02 04 COM + 05 05 − 07 00 NC 01 02 03 04 COM COM COM COM 06 05 00 07 01 03 COM 02 04 COM NC 05 05 NC 07 01 06 07 01 02 04 03 05 COM 06 07 · AC Power Supply Models 02 04 03 05 COM 07 06 CIO 100 00 COM + 02 01 − 03 01 00 01 02 COM COM COM 04 03 05 COM NC NC CIO 1
PAGE 6
High-speed Counter Function Input Specifications Output Specifications CPU Units with Relay Outputs Input bits: CIO 0.00 to CIO 0.03 Item ON/OFF delay Specifications • Pulse plus direction input mode • Increment mode • Up/down input mode Item Max. switching capacity Min. switching capacity SerElec- Resistive vice trical load life of Inductive relay load Mechanical ON delay OFF delay Circuit configuration 10.0 μs min. ON 90% 50% 10% OFF 2.5 μs min. 2.5 μs min.
PAGE 7
Pulse outputs Pulse outputs Output bits CIO 100.00 to CIO 100.03 Output bits CIO 100.01, CIO 100.03 Item Max. switching capacity Min. switching capacity Max. output frequency Output waveform Item Max. switching capacity Max. output frequency PWM output precision Output waveform Specifications 30 mA at 4.75 to 26.4 VDC 7 mA at 4.75 to 26.4 VDC 100 kHz OFF 90% Specifications 30 mA at 4.75 to 26.4 VDC CP1L: 32.8 kHz ON duty +5%, -0% at output frequency of 1 kHz OFF ON ON 10% ton T 4 μs min.
PAGE 8
Connecting Expansion Units and Expansion I/O Units CP-series and CPM1A-series Expansion Units and Expansion I/O Units can be connected to the CP1L. Up to three Expansion Units or Expansion I/O Units can be connected to a CPU Unit with 30 or 40 I/O points and one Expansion Unit or Expansion I/O Unit can be connected to a CPU Unit with 20 or 14 I/O points.
PAGE 9
Input Specifications of Expansion I/O Units DC Inputs (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED) Relay Outputs (CP1W-40EDR/20EDR1/16ER/8ER) Item Input voltage Input impedance Input current ON voltage OFF voltage ON delay OFF delay Circuit configuration Item Max. switching capacity Min. switching capacity Service Elec- Resistive life of trical load relay Inductive load Mechanical ON delay OFF delay Circuit configuration Specifications 24 VDC +10%/-15% 4.7 k 5 mA typical 14.4 VDC min. 5.0 VDC max.
PAGE 10
CP1W-AD041/DA041/DA021/MAD11 Analog Units Analog values that are input are converted to binary data and stored in the input area, or binary data is output as analog values. Analog Input Unit: CP1W-AD041 Analog Output Unit: CP1W-DA041/DA021 Model CP1W-AD041 Item Input voltage Input current Number of inputs 4 Input signal range 0 to 5 V, 1 to 5 V, 0 to 20 mA 0 to 10 V, -10 to 10 V 4 to 20 mA Max. rated input 15 V 30 mA External input 1 M min. Approx. 250  impedance Resolution 6000 Overall 25C 0.
PAGE 11
Temperature Sensor Units: CP1W-TS001/TS002/TS101/TS102 By mounting a Temperature Sensor Unit to the PLC, inputs can be obtained from thermocouples or platinum resistance thermometers, and temperature measurements can be converted to binary data (4-digit hexadecimal) and stored in the input area of the CPU Unit.
PAGE 12
Dimensions (Unit: mm) CP1L CPU Units with 40 I/O Points 150 85 140 8 Weight: 675 g max. 110 100 90 Four, 4.5 dia. CP1L CPU Units with 30 I/O Points 130 85 120 8 Weight: 610 g max. 110 100 90 Four, 4.5 dia. CP1L CPU Units with 14 or 20 I/O Points 86 85 76 8 Weight: 380 g max. 110 100 90 Four, 4.5 dia.
PAGE 13
Expansion Units and Expansion I/O Units CP1W-20ED@ CP1W-16ER CP1W-AD041/CP1W-DA041/CP1W-DA021 CP1W-MAD11/CP1W-TS@@@ CP1W-8E@@ CP1W-SRT21 COM 01 03 05 07 09 11 00 02 04 06 08 10 NC COM 01 00 CH IN 03 02 IN CH 00 01 02 03 04 05 06 07 CH 00 01 02 03 08 09 10 11 08 09 10 11 90 20EDR1 90 8ED OUT CH NC 00 01 02 03 04 05 06 07 CH 00 01 02 04 05 07 NC COM COM COM 03 COM 06 EXP EXP 04 COM 86 66 50 CP1W-40ED@ NC COM NC NC 01 00 03 02 05 04 07 06 09 08 11 10 01 00 CH 03 02 05 04
PAGE 14
Ordering Information CPU Units International Standards The standards indicated in the “Standards” column are those current for UL, CSA, cULus, NK, and Lloyd standards and EC Directives as of the end of April 2007.
PAGE 15
Expansion Units Name Expansion I/O Units Output method Relay Inputs 24 Outputs 16 Model CP1W-40EDR Transistor (sinking) CP1W-40EDT Transistor output (sourcing) CP1W-40EDT1 Relay 12 8 Standards N, L, CE CP1W-20EDR1 U, C, L, CE Transistor (sinking) CP1W-20EDT U, C, N, L, CE Transistor output (sourcing) CP1W-20EDT1 Relay --- 16 CP1W-16ER CE --- 8 --- CP1W-8ED U, C, N, L, CE Relay --- 8 CP1W-8ER Transistor (sinking) --- 8 Transistor output (sourcing) CP1W-8ET CP1W-8ET1 Ana
PAGE 16
Read and Understand this Catalog Please read and understand this catalog before purchasing the product. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.