Datasheet

Connecting Online from the CX-Programmer

The USB-Serial Conversion Cable uses one of the computer's COM ports to

communicate. The communications port (COM port) allocated to the Conversion Cable

must be selected with the CX-Programmer in order to connect online to a PLC or PT.

Note: It may take some time for the computer to detect the cable after the cable is connected. This

is not a malfunction.

█ Selecting the Cable's COM Port in CX-Programmer

Use the following procedure to select the COM port used by the Conversion Cable.

1. Display the Change PLC dialog box.

2. Click the Settings button in the Network Type area. Select the desired type of

network.

The Network Settings dialog box will be displayed.

3. Click the Driver tab in the Network Settings dialog box.