Datasheet

CJ2M-CPU3@/-CPU1@/-MD21@
28
Related Manuals
Cat. No. Model Manual Application Description
W472
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CJ-series CJ2 CPU Unit
Hardware User’s
Manual
Hardware specifications for CJ2
CPU Units
Describes the following for CJ2 CPU Units:
• Overview and features
• Basic system configuration
• Part nomenclature and functions
• Mounting and setting procedure
• Remedies for errors
• Also refer to the Software User’s Manual (W473).
W473
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CJ-series CJ2 CPU Unit
Software User’s Manual
Software specifications for CJ2
CPU Units
Describes the following for CJ2 CPU Units:
• CPU Unit operation
• Internal memory
• Programming
• Settings
• Functions built into the CPU Unit
Also refer to the Hardware User’s Manual (W472)
W486
CJ2M-CPU@@
+
CJ2M-MD21@
CJ-series CJ2M CPU
Unit Pulse I/O Module
User's Manual
Information on using Pulse I/O
on CJ2M CPU Units
Provides the following information on the CJ2M CPU Units:
• Specifications and wiring methods
• I/O functions
• Quick-response inputs
• Interrupt functions
• High-speed counters
• Pulse outputs
• PWM outputs
When programming, use this manual together with the
Instructions Reference Manual (Cat. No. W474).
W474
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU3@
CJ2M-CPU1@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CJ1G/H-CPU@@H
CJ
1
G-CPU@@
CJ1M-CPU@@
NSJ@-@@@@(@)-@@@
CS/CJ/NSJ-series
Instructions Reference
Manual
Information on instructions
Describes each programming instruction in detail.
Also refer to the Software User’s Manual (W473) when you
do programming.
W342
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CS1D-CPU@@H
CS1D-CPU@@S
CS1W-SCU@@-V1
CS1W-SCB@@-V1
CJ1H-CPU@@H-R
CJ1G/H-CPU@@H
CJ1G-CPU@@P
CJ1M-CPU@@
CJ1G-CPU@@
CJ1W-SCU@@-V1
CP1H-X@@@@-@
CP1H-XA@@@@-@
CP1H-Y@@@@-@
CP1E-E/N@@D@-@
NSJ@-@@@@(@)-@@@
CS/CJ/CP/NSJ-series
Communications
Command Reference
Manual
Information on communications
for CS/CJ/CP-series CPU Units
and NSJ-series Controllers
Describes C-mode commands and FINS commands
Refer to this manual for a detailed description of commands
for communications with the CPU Unit using C mode
commands or FINS commands.
Note: This manual describes the communications
commands that are addressed to CPU Units. The
co
mmunicat
ions path that is used is not relevant and
can include any of the following: serial ports on CPU
Units, communications ports on Serial
Communications Units/Boards, and Communications
Units. For communications commands addressed to
Special I/O Units or CPU Bus Units, refer to the
operation manual for the related Unit.
W465
CJ2H-CPU6@-EIP
CJ2M-CPU3@
CS1W-EIP21
CJ1W-EIP21
CS and CJ Series
EtherNet/IP Units
CS1W-EIP21, CJ1W-
EIP21, CJ2H-CPU6@-
EIP, CJ2M-CPU3@
Operation Manual
Information for EtherNet/IP
function of CJ2M built-in
Ethernet port
Describes EtherNet/IP port/units. A basic setting, a tag data
link, FINS communication, and other function are described.
W463 CXONE-AL@@D-V@ CX-One Setup Manual
Installing software from the CX-
One
Provides an overview of the CX-One FA Integrated Tool
Package and describes the installation procedure.
W446
WS02-CXPC@-V@
CX-Programmer
Operation Manual
Support Software for Windows
computers
CX-Programmer operating
procedure
Describes operating procedures for the CX-Programmer.
Also refer to the Software User’s Manual (W473) and
Instructions Reference Manual (W474) when you do
programming.
W447
CX-Programmer
Operation Manual
Functions Blocks/
Structured Text
W469
CX-Programmer
Operation Manual SFC
Programming
W366 WS02-SIMC1-E
CS/CJ/CP/NSJ-series
CX-Simulator Operation
Manual
Operating procedures for CX-
Simulator Simulation Support
Software for Windows
computers
Using simulation in the CX-
Programmer with CX-
Programmer version 6.1 or
higher
Describes the operating procedures for the CX-Simulator.
When you do simulation, also refer to the CX-Programmer
Operation Manual (W446), Software User’s Manual (W473),
and CS/CJ/NSJ series Instructions Reference Manual
(W474).
W464 CXONE-AL@@D-V@
CS/CJ/CP/NSJ-series
CX-Integrator Network
Configuration Software
Operation Manual
Network setup and monitoring Describes the operating procedures for the CX-Integrator.