Datasheet

142 Programmable Controllers
CJ1
NS-seris PT
CJ1
CJ1
CJ1
CJ1
W-series
Servo Driver
(with positioner
functions)
DeviceNet
Controller Link
Ethernet
RS-232C
Seamless
Controller network
Information network
Component network
DeviceNet Unit
(can operate as
master or slave)
Temperature
Controller
(PID constants and
other parameters
can be set from
DeviceNet
Configurator.)
CompoBus/S
Programmable
Slave
FINS message
FINS message
FINS message
FINS message
Remote I/O communications
Controller Link Unit
DeviceNet
Unit
Data Links
Controller Link Unit
Ethernet Unit
• TCP/IP or UDP/IP socket service
• FINS message communications
• Message client (SMTP) function
• FTP server function
(File read/write to Memory Card)
Serial communications
Modem
Modem
Email
Public telephone line
Head office, remote office,
home, on business trips
• CX-Programmer
Head office or remote office
• Web browser
• CX-Programmer
Head office,
remote office,
home, on
business trips
• Web browser
Internet
Email
HTTP/socket
Automatic FTP transfer of
collected data
(Intranet)
Open Network Controller
• Web server function
• Email client (SMTP)
• FTP client
(Collected data file
transferred to host using FTP
when transfer conditions are
met.)
• FINS message
communications
DeviceNet
Configurator
Seamless message communications across
eight levels of component, controller, and
information networks.
DRT2-series
Smart Slave
Note: Only Ethernet and Controller Link networks can be used for access across eight levels.
NS-series PT
CJ-series PLC
CJ-series PLC
Peripheral
bus
Serial
Peripheral port
(or RS-232C port)
NS-series PT
RS-232C
Ethernet
Controller Link
CJ-
series
PLC
NT Link
Serial
NT Link
NT Link
Serial
Serial
NS-series PT
Ladder programs
From CX-Programmer to PLC via NS-series PT
Screen data or Memory Card data
From CX-Designer to NS-series PT via PLC
SPMA
See
note
( )
The CJ Series is suitable for equipment ranging from small to large scale, making it
equally convenient for building systems for essentially any machine size.
Screen data can be transferred from the NS-Designer via the
PLC to an NS-series PT connected to the PLC either serially
or through the network. The CX-Programmer can
be used to monitor ladder programs or transfer them via an
NS-series PT to the PLC connected to an NS-series PT
either serially or through the network.
Use SPMA (Single Port Multi Access) to Transfer
Ladder Programs, NS-series PT Screen Data,
and Memory Card Data without Connecting to a
Personal Computer.
NS-series PT: System Ver. 3.0 or higher
CX-Programmer: Ver. 3.1 or higher
PLC CJ1H/CJ1G-CPU H/CJ1M-CPU : Lot No. 030201 or later
NS-Designer: Ver. 3.0 or higher
Personal computer
Personal
computer
Screens can
be
transferred
from
Controller
Link using
Ver. 6.
Y201-EN2-03.book Seite 142 Donnerstag, 30. März 2006 1:52 13