Datasheet

141
Programmable
Controllers
CJ1H
C200HX/HG/HE
CJ1H
C200HX/HG/HE
RS-232C
Reduce cycle Time and Increase Productivity with
Higher Machine Speed.
High speed, from input through processing to output, for better application performance.
Application Examples
Replace High-speed Microcomputer Boards
with PLCs.
Although previously microcomputer boards were used where
processing speeds below 1 ms were required, the CJ1-series
PLCs can now take this role, AND provide scalability, and
easier debugging and maintenance.
Replace Two PLCs Used to Increase
Processing Speed with One CJ1-series PLC.
Although previously two PLCs were somtetimes used to enable
reading short pulses, the CJ1-series PLCs can now take this
role too.
Example: Assembling Equipment
29 ms
7 ms
Time required to receive sensor in-
put at the CompoBus/S Remote
I/O Terminal, perform operations
in the CPU Unit, and turn ON a so-
lenoid valve via the CompoBus/S
Remote I/O Terminal
(Conditions: 10-Kstep program; ratio of ba-
sic instructions to special instructions: 1:1)
29 ms
111 ms
Time required to input image
data, perform operations in
the CPU Unit, and output pul-
ses from the Position Control
Unit
(Conditions: 30-Kstep program;
ratio of basic instructions to special in-
structions: 1:1)
Top-of-the-Line CJ1-series PLC: Executes 38-Kstep program in 1 ms (with basic instructions only)
LD or OUT instruction is executed in 20 ns
Example: Inspection Equipment
CJ1H
Cycle Time for 30-Kstep Program
(Conditions: Basic instructions: 50%; MOV instructions: 30%; Arithmetic instructions: 20%)
Cycle time
33.7 ms
1.23 ms
C200HX/HG/HE
Previous PLCs
High-speed processing
The same level of high-speed
processing
High-speed processing
(Example: 1-ms response)
High-speed processing
Integration
SYSMAC CJ1-series
PLC
SYSMAC CJ1-series
PLC
Servo driver
CompoBus/S Master Unit
CompoBus/S
CPU Unit
Sensor
Remote I/O
Terminal
Remote I/O
Terminal
Actuator
Position Control Unit
CPU Unit
Servomotor
Controller
Image processing
F160
Dedicated microcomputer board
Fast
Y201-EN2-03.book Seite 141 Donnerstag, 30. März 2006 1:52 13