Datasheet

154 Programmable Controllers
CJ1H-, CJ1G-CPU@@H, CJ1M-CPU@@
CJ1 series CPU Units
Peripheral Port
RS-232C Port
Indicators
Memory Card Indicators
Memory Card Eject Button
Memory Card Connector
Memory Card
Slider
Secures the neighboring Unit.
Connector
Connect to neighboring Unit
by joining Connectors.
MCPWR (green): Lit when
power is supplied to the
Memory Card.
BUSY (orange): Lit when
Memory Card is being
accessed.
Press the eject button to remove the Memory Card from the CPU Unit.
The RS-232C port is connec-
ted to Programming Devices
other than Programming Con-
soles, host computers, gene-
ral-purpose external devices,
or Programmable Terminals.
The peripheral port is connect-
ed to Programming Devices,
such as Programming Con-
soles, or host computers.
CJ1H-CPU6@H
CJ1G-CPU4@H
CJ1-CPU@@P
Other components are the same as the
CJ1H-CPU6@H and CJ1G-CPU4@H CPU
Units.
Loop Controller
Element Indicators
Show the
EXECUTING status
and READY status.
Press the power supply switch
to disconnect power before re-
moving the Memory Card. Al-
so, press the Memory Card
Power Supply Switch to
perform an easy
backup operation.
Memory Card Power
Supply Switch
CJ1M-CPU1@ CJ1M-CPU1@-ETN CJ1M-CPU2@
Components are the same as the CJ1H-
CPU6@H and CJ1G-CPU4@H CPU Units.
I/O Indicators
Show the
status of the
built-in I/O.
Built-in I/O
Connector
MIL connector
(40-pin)
Other components are the same as the CJ1H-
CPU6@H and CJ1G-CPU4@H CPU Units.
100Base-TX
Ethernet Port
for data communi-
cation, program-
ming, monitoring
and FTP server
functions
Y201-EN2-03.book Seite 154 Donnerstag, 30. März 2006 1:52 13