Datasheet
244 Programmable Controllers
Special I/O Units
1. The ambient operating temperature for 4-Axis Position Control Units is 0 to 50 °C; mount a Spacer Unit to the Position Control Unit
in case the ambient temperature may reach 55 °C. The allowable voltage fluctuation on the external 24- V DC power supply is 22.8 to
25.2 V DC (24 V ±5%).
2. Two Servo Relay Units and two cables for the Position Control Unit are required for a 4-Axis Position Control Unit.
3. Refer to the Auto-Identification Components Group Catalog (Cat. No. Q132) for details on the V600 Series RFID System
Name Specifications Model Standards
Analog Input Units 8 inputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Resolution: 1/8000, Conversion speed: 0.25 ms/point
CJ1W-AD081-
V1(SL)
UC1, CE, N, L
4 inputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Resolution: 1/8000, Conversion speed: 0.25 ms/point
CJ1W-AD041-
V1(SL)
UC1, CE, N, L
Analog Output Units 8 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V)
Resolution: 1/4000, Conversion speed: 1 ms/point max. (Settable to 1/8000, 250 μs/point)
CJ1W-DA08V(SL) UC1, CE, N, L
8 outputs (4 to 20 mA)
Resolution: 1/4000, Conversion speed: 1 ms/point max. (Settable to 1/8000, 250 μs/point)
CJ1W-DA08C(SL) UC1, CE, N, L
4 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Resolution: 1/4,000, Conversion speed: 1 ms/point max.
CJ1W-DA041(SL) UC1, CE, N, L
2 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Resolution: 1/4000, Conversion speed: 1 ms/point max.
CJ1W-DA021(SL) UC1, CE, N, L
Analog I/O Unit 4 inputs, 2 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Resolution: 1/4000, Conversion speed: 1 ms/point max. (Settable to 1/8000, 250 μs/point)
CJ1W-MAD42(SL) UC1, CE, N, L
Process Input Units 2 isolated DC inputs, 16-bit resolution, conversion speed 10 ms/2 pts CJ1W-PDC15 UC1, CE
2 isolated thermocouple inputs, 16-bit resolution, conversion speed 10 ms/2pts CJ1W-PTS15
2 isolated Pt100 inputs, 16-bit resolution, conversion speed 10 ms/2pts CJ1W-PTS16
4 isolated inputs, thermocouple type R, S, K, J, T, L, B. Conversion speed 250 ms/4 pts CJ1W-PTS51
4 isolated Pt100 inputs (JIS, IEC). Conversion speed 250 ms/4 pts CJ1W-PTS52
Temperature
Control Units
4 loops, thermocouple input, NPN output CJ1W-TC001 UC1, CE, N, L
4 loops, thermocouple input, PNP output CJ1W-TC002
2 loops, thermocouple input, NPN output, heater burnout detection function CJ1W-TC003
2 loops, thermocouple input, PNP output, heater burnout detection function CJ1W-TC004
4 loops, platinum resistance thermometer input, NPN output CJ1W-TC101
4 loops, platinum resistance thermometer input, PNP output CJ1W-TC102
2 loops, platinum resistance thermometer input, NPN output, heater burnout detection function CJ1W-TC103
2 loops, platinum resistance thermometer input, PNP output, heater burnout detection function CJ1W-TC104
High-speed Counter Unit 2 inputs, max. input frequency: 500 kpps CJ1W-CT021 UC1, CE, N, L
4-Channel Counter Unit 4 inputs, max. input frequency: 100 kpps CJ1W-CTL41-E UC1, CE, L
Screwless Terminal Block for CJ1W-CTL41-E XW2G-40G7-E CE
2-SSI Encoder Input Unit 2 Synchronous Serial Interface channels CJ1W-CTS21-E CE, L
PROFIBUS-DP I/O Link Unit Exchanges up to 180 words in any memory area with a PROFIBUS-DP Master Unit CJ1W-PRT21 UC1, CE
CompoBus/S Master Unit CompoBus/S remote I/O, 256 points max. CJ1W-SRM21 UC1, CE, N, L
Position Control Units Pulse train, open collector output, 1 axis CJ1W-NC113 UC1, CE
Pulse train, open collector output, 2 axes CJ1W-NC213
Pulse train, open collector output, 4 axes (See note 1.) CJ1W-NC413
Pulse train, line driver output, 1 axis CJ1W-NC133
Pulse train, line driver output, 2 axes CJ1W-NC233
Pulse train, line driver output, 4 axes (See note 1.) CJ1W-NC433
Spacer Unit (See note 1.) CJ1W-SP001
Servo Relay Units
(See note 2.)
For 1-Axis Position Control Unit (without communications support)
(CS1W-NC113/133, CJ1W-CN113/133, C200HW-NC113, C200H-NC112)
XW2B-20J6-1B
For 2- or 4-Axis Position Control Unit (without communications support)
(CS1W-NC213/233/413/433, CJ1W-CN213/233/413/433, C200HW-NC213/413, C500-NC213/
211, C200H-NC211)
XW2B-40J6-2B
For 2- or 4-Axis Position Control Unit (with communications support)
(CS1W-NC213/233/413/433, CJ1W-CN213/233/413/433, C200HW-NC213/413)
XW2B-40J6-4A
Position Control Unit Cables
(See note 2.)
Connects CJ1W-NC113 to W Series, Cable length: 0.5 m XW2Z-050J-A14
Connects CJ1W-NC113 to W Series, Cable length: 1 m XW2Z-100J-A14
Connects CJ1W-NC213/413 to W Series, Cable length: 0.5 m XW2Z-050J-A15
Connects CJ1W-NC213/413 to W Series, Cable length: 1 m XW2Z-100J-A15
Connects CJ1W-NC113 to SmartStep, Cable length: 0.5 m XW2Z-050J-A16
Connects CJ1W-NC113 to SmartStep, Cable length: 1 m XW2Z-100J-A16
Connects CJ1W-NC213/413 to SmartStep, Cable length: 0.5 m XW2Z-050J-A17
Connects CJ1W-NC213/413 to SmartStep, Cable length: 1 m XW2Z-100J-A17
Connects CJ1W-NC133 to W Series, Cable length: 0.5 m XW2Z-050J-A18
Connects CJ1W-NC133 to W Series, Cable length: 1 m XW2Z-100J-A18
Connects CJ1W-NC233/433 to W Series, Cable length: 0.5 m XW2Z-050J-A19
Connects CJ1W-NC233/433 to W Series, Cable length: 1 m XW2Z-100J-A19
Connects CJ1W-NC133 to SmartStep, Cable length: 0.5 m XW2Z-050J-A20
Connects CJ1W-NC133 to SmartStep, Cable length: 1 m XW2Z-100J-A20
Connects CJ1W-NC233/433 to SmartStep, Cable length: 0.5 m XW2Z-050J-A21
Connects CJ1W-NC233/433 to SmartStep, Cable length: 1 m XW2Z-100J-A21
ID Sensor Unit
(See note 3.)
For V600 Series, 1 R/W Head CJ1W-V600C11 ---
For V600 Series, 2 R/W Heads CJ1W-V600C12
Y201-EN2-03.book Seite 244 Donnerstag, 30. März 2006 1:52 13