Datasheet

241
Programmable
Controllers
Note: Refer to the catalogs or user manuals for the Servo Drivers.
,
Name Specifications Model
Applicable Connector MIL Flat Cable Connectors (Pressure-fitted Connectors) XG4M-4030-T
Terminal Blocks General-purpose type (M3 screw terminals,40-pin) XW2D-40G6
Special Connecting Cables Cable length: 1 m XW2Z-100K
Cable length: 1.5 m XW2Z-150K
Cable length: 2 m XW2Z-200K
Cable length: 3 m XW2Z-300K
Cable length: 5 m XW2Z-500K
Servo Relay Units (See note.) Servo Relay Unit for 1 axis XW2B-20J6-8A
Servo Relay Unit for 2 axes XW2B-40J6-9A
SMARTSTEP Cable for CJ1M CPU Unit, cable length: 1 m XW2Z-100J-A26
W-series Servo Cable for CJ1M CPU Unit, cable length: 1 m XW2Z-100J-A27
Programming Devices
Name Specifications Model Standards
Programming Consoles An English Keyboard Sheet (CS1W-KS001-E) is required.
(Connects on peripheral port on CPU Unit only.)
CQM1H-PRO01-E U, C, CE
U, C, N, CE
Programming Console
Key Sheet
For CQM1H-PRO01-E, CQM1-PRO01-E, and C200H-PRO27-E. CS1W-KS001-E CE
Programming Console
Connecting Cables
Connects the CQM1-PRO01-E Programming Console. (Length: 0.05 m) CS1W-CN114
Connects the C200H-PRO27-E Programming Console. (Length: 6.0 m) CS1W-CN624
Programming Device
Connecting Cables (for
peripheral port)
Connects DOS computers, D-Sub 9-pin receptacle (Length: 0.1 m) (Conversion cable to con-
nect RS-232C cable to peripheral port)
CS1W-CN118 CE
Connects DOS computers,
D-Sub 9-pin (Length: 2.0 m)
Used for Peripheral Bus or Host Link. CS1W-CN226
Connects DOS computers,
D-Sub 9-pin (Length: 6.0 m)
CS1W-CN626
Programming Device
Connecting Cables (for
RS-232C port)
Connects DOS computers,
D-Sub 9-pin (Length: 2.0 m)
Used for Peripheral Bus or Host Link.
Anti-static connectors
XW2Z-200S-CV ---
Connects DOS computers,
D-Sub 9-pin (Length: 5.0 m)
XW2Z-500S-CV
Connects DOS computers,
D-Sub 9-pin (Length: 2.0 m)
Used for Host Link only. Peripheral Bus not sup-
ported.
XW2Z-200S-V
Connects DOS computers,
D-Sub 9-pin (Length: 5.0 m)
XW2Z-500S-V
USB-serial conversion
cable
USB-toRS-232C conversion cable (0.5 m) and driver CD-ROM (WIN98, ME, 2000, XP),
USB version 1.1, USB plug: A-type, male. RS-232C plus: 9-pin D-sub, male
CS1W-CIF31 CE
CX-One Omron's integrated software for programming and configuration of all control system compo-
nents, including PLCs, HMI, drives, temperature controllers and advanced sensors.
CX-ONE-AL@@C-E
*1
---
*1
@@ = Number of licences; 01, 03, 10
Optional Products, Maintenance Products and DIN rail
Name Specifications Model Standards
Battery Set For CJ1G and CJ1H CPU Units (Use batteries within two years of manufacture.) CPM2A-BAT01 L, CE
For CJ1M CPU Units (Use batteries within two years of manufacture.) CJ1M-BAT01 CE
End Cover Mounted to the right-hand side of CJ-series CPU Racks or Expansion Racks.
One End Cover is provided as a standard accessory with each CPU Unit and I/O Interface Unit.
CJ1W-TER01 UC1
DIN rail Length: 0.5 m; Height: 7.3 mm PFP-50N ---
Length: 1 m; Height: 7.3 mm PFP-100N
Length: 1 m; Height: 16 mm PFP-100N2
End Plate There are 2 stoppers provided with CPU Units and I/O Interface Units as standard accessories to secure
the Units on the DIN rail.
PFP-M
Y201-EN2-03.book Seite 241 Donnerstag, 30. März 2006 1:52 13