Datasheet

CJ1W-ID/IA
18
64-point Units (Models with Two 40-point Fujitsu Connectors or MIL Connector)
Wiring Basic I/O Units with Terminal Blocks
Electric Wires
The following wire gauges are recommended.
Crimp terminals
Use crimp terminals (M3) having the dimensions shown below.
Terminal Block Connector Wire Size
18-terminal AWG 22 to 18 (0.32 to 0.82 mm
2
)
ID261
0 1 2 3 4 5 6 7
8 9
12 13 14 15
10 11
0 1 2 3 4 5 6 7
8 9
12 13 14 15
10 11
I
II
ID261
1 2
Model number
I/O indicators
Unit with MIL Connector
Unit with Fujitsu-compatible
Connector
Connector
Connected to the connector on the next Unit.
Indicator Switch
Changes the 32 I/O displayed on the I/O indicators.
Setting 1
Setting 2
I/O wiring
connector
(40-pin × 2)
Wd m and m+1: CN1
Wd m+2 and m+3: CN2
Word m or
m+2
Word m+1
or m+3
6.2 mm max.
6.2 mm max.