Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationInput Unit 24VDC

CSM_CJ1W-ID_IA_DS_E_11_3

CJ-series Input Units

CJ1W-ID/IA

A Wide Range of Basic Input

Units for High Speed Input and

Different Applications

• Receive ON/OFF signals from external devices

into the PLC System to update I/O memory in the

CPU Unit.

• New high-speed input models CJ1W-ID212 and

CJ1W-ID233 are now available. These units can

help to increase system throughput.

Features

• High-speed input models are available, meeting versatile applications.

ON Response Time: 15μs, OFF Response Time: 90μs

• Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs.

• The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. *1

• A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise.

• Either a Fujitsu or MIL connector interface can be used. *2

• Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices.

*1. The same polarity is used for the same common.

*2. For models with 32 or 64 inputs.

CJ1W-ID212 CJ1W-ID233

Summary of content (25 pages)

PAGE 1
CJ-series Input Units CJ1W-ID/IA CSM_CJ1W-ID_IA_DS_E_11_3 A Wide Range of Basic Input Units for High Speed Input and Different Applications • Receive ON/OFF signals from external devices into the PLC System to update I/O memory in the CPU Unit. • New high-speed input models CJ1W-ID212 and CJ1W-ID233 are now available. These units can help to increase system throughput. CJ1W-ID212 CJ1W-ID233 Features • High-speed input models are available, meeting versatile applications.
PAGE 2
CJ1W-ID/IA Ordering Information International Standards • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. • Contact your OMRON representative for further details and applicable conditions for these standards.
PAGE 3
CJ1W-ID/IA Applicable Connectors Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units Name Connection Soldered 40-pin Connectors FCN-363J040 FCN-363J-AU FCN-360C040-J2 Crimped 24-pin Connectors Remarks Applicable Units FCN-361J040-AU Connector FCN-360C040-J2 Connector Cover Housing Contactor Connector Cover Model Fujitsu Connectors: CJ1W-ID231(32 inputs): 1 per Unit CJ1W-ID261 (64 inputs): 2 per Unit CJ1W-OD231 (32 outputs):1 per Unit CJ
PAGE 4
CJ1W-ID/IA Applicable I/O Relay Terminals Size (horizontal mounting) Specifications Type Series Classification Polarity Relay outputs Vertical type G70D-V MOSFET NPN relay outputs Number of points Rated ON current at contacts 5A or 3A 16 (SPSTNO × 16) 0.
PAGE 5
CJ1W-ID/IA Mountable Racks NJ system Model CJ system (CJ1, CJ2) CPU Rack Expansion Rack CPU Rack Expansion Backplane 10 Units 10 Units (per Expansion Rack) 10 Units 10 Units (per Expansion Backplane) CP1H system NSJ system CP1H PLC NSJ Controller Expansion Backplane Not supported Not supported 10 Units (per Expansion Backplane) CJ1W-ID201 CJ1W-ID211 CJ1W-ID212 CJ1W-ID231 CJ1W-ID232 CJ1W-ID233 CJ1W-ID261 CJ1W-ID262 CJ1W-IA201 CJ1W-IA111 5
PAGE 6
CJ1W-ID/IA Specifications CJ1W-ID201 DC Input Unit (12 to 24-VDC, 8 Points) Name 8-point DC Input Unit with Terminal Block Model CJ1W-ID201 Rated Input Voltage 12 to 24 VDC Rated Input Voltage Range 10.2 to 26.4 VDC Input Impedance 2.4 kΩ Input Current 10 mA typical (at 24 VDC) ON Voltage/ON Current 8.8 VDC min./3 mA min. OFF Voltage/OFF Current 3 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max.
PAGE 7
CJ1W-ID/IA CJ1W-ID211 DC Input Unit (24 VDC, 16 Points) Name 16-point DC Input Unit with Terminal Block Model CJ1W-ID211 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 3.3 kΩ Input Current 7 mA typical (at 24 VDC) ON Voltage/ON Current 14.4 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max.
PAGE 8
CJ1W-ID/IA CJ1W-ID212 DC Input Unit (24 VDC, 16 Points) Name 16-point DC Input Unit with Terminal Block Model CJ1W-ID212 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 3.3 kΩ Input Current 7 mA typical (at 24 VDC) ON Voltage/ON Current 14.4 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max.
PAGE 9
CJ1W-ID/IA CJ1W-ID231 DC Input Unit (24 VDC, 32 Points) Name 32-point DC Input Unit with Fujitsu Connector Model CJ1W-ID231 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max.
PAGE 10
CJ1W-ID/IA CJ1W-ID232 DC Input Unit (24 VDC, 32 Points) Name 32-point DC Input Unit with MIL Connector Model CJ1W-ID232 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max.
PAGE 11
CJ1W-ID/IA CJ1W-ID233 DC Input Unit (24 VDC, 32 Points) Name 32-point DC Input Unit with MIL Connector Model CJ1W-ID233 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max.
PAGE 12
CJ1W-ID/IA CJ1W-ID261 DC Input Unit (24 VDC, 64 Points) Name 64-point DC Input Unit with Fujitsu Connector Model CJ1W-ID261 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max.
PAGE 13
CJ1W-ID/IA CJ1W-ID262 DC Input Unit (24 VDC, 64 Points) 64-point DC Input Unit with MIL Connector CJ1W-ID262 24 VDC 20.4 to 26.4 VDC 5.6 kΩ 4.1 mA typical (at 24 VDC) 19.0 VDC min./3 mA min. 5 VDC max./1 mA max. 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * 64 (16 points/common, 4 circuits) 50% (8 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustrations.) 20 MΩ min.
PAGE 14
CJ1W-ID/IA CJ1W-IA201 AC Input Unit (200 VAC, 8 Points) Name 8-point AC Input Unit with Terminal Block Model CJ1W-IA201 Rated Input Voltage 200 to 240 VAC 50/60 Hz Rated Input Voltage Range 170 to 264 VAC Input Impedance 21 kΩ (50 Hz), 18 kΩ (60 Hz) Input Current 9 mA typical (at 200 VAC, 50 Hz), 11 mA typical (at 200 VAC, 60 Hz) ON Voltage/ON Current 120 VAC min./4 mA min. OFF Voltage/OFF Current 40 VAC max./2 mA max. ON Response Time 18.0 ms max.
PAGE 15
CJ1W-ID/IA CJ1W-IA111 AC Input Unit (100 VAC, 16 points) Name 16-point AC Input Unit with Terminal Block Model CJ1W-IA111 Rated input voltage 100 to 120 VAC 50/60 Hz *2 Rated Input Voltage Range 85 to 132 VAC Input Impedance 14.5 kΩ (50 Hz), 12 kΩ (60 Hz) Input Current 7 mA typical (at 100 VAC, 50 Hz), 8 mA typical (at 100 VAC, 60 Hz) ON Voltage/ON Current 70 VAC min./4 mA min OFF Voltage/OFF Current 20 VAC max./2 mA max ON Response Time 18 ms max.
PAGE 16
CJ1W-ID/IA Bit Allocations for Input Unit 8-point Input Unit 16-point Input Unit Allocated CIO word CIO Bit Wd m (Input) Signal name (CJ/NJ) Wd m+1 (Input) Signal name (CJ/NJ) IN0/Jxx_Ch1_In00 00 IN0/Jxx_Ch1_In00 01 IN1/Jxx_Ch1_In01 01 IN1/Jxx_Ch1_In01 : : 06 Wd m (Input) : : IN6/Jxx_Ch1_In06 14 IN14/Jxx_Ch1_In14 07 IN7/Jxx_Ch1_In07 15 IN15/Jxx_Ch1_In15 08 − 09 − : : 14 − 15 − 64-point Input Unit Allocated CIO word Wd m (Input) Bit 00 32-point Input Unit CIO Alloc
PAGE 17
CJ1W-ID/IA External Interface 8-point/16-point Units (18-point Terminal Blocks) Model number label I/O indicators Connector Connect to the connector on the next Unit. Terminal block for I/O wiring, 18P × 1 ERR 0 1 8 9 10 11 12 13 14 15 2 3 4 5 6 7 32-point Units (Models with 40-point Fujitsu Connector or MIL Connector) Model number Indicator Switch ID231 1 ID232 I/O indicators 2 Changes the 16 I/O displayed on the I/O indicators.
PAGE 18
CJ1W-ID/IA 64-point Units (Models with Two 40-point Fujitsu Connectors or MIL Connector) Indicator Switch Model number 1 2 Changes the 32 I/O displayed on the I/O indicators. ID261 ID261 I/O indicators Setting 1 Setting 2 Wd m and m+1: CN1 Wd m+2 and m+3: CN2 I/O wiring connector (40-pin × 2) Unit with MIL Connector Unit with Fujitsu-compatible Connector Connector Connected to the connector on the next Unit.
PAGE 19
CJ1W-ID/IA I/O Unit Wiring Methods An I/O Unit can be connected to an external device by any of the following three methods. 1. User-provided Cable An I/O Unit can be directly connected to an external device by using a connector. A B A User-provided cable B External device C Connector C 2. Connector-Terminal Block Conversion Unit Use a Connecting Cable to connect to a Connector-Terminal Block Conversion Unit.
PAGE 20
CJ1W-ID/IA 1. Using User-made Cables with Connector Available Connectors Use the following connectors when assembling a connector and cable.
PAGE 21
CJ1W-ID/IA 2.
PAGE 22
CJ1W-ID/IA 3.
PAGE 23
CJ1W-ID/IA Dimensions (Unit: mm) 8-point/16-point Units (18-point Terminal Blocks) CJ1W-ID201 CJ1W-ID211 CJ1W-ID212 CJ1W-IA201 CJ1W-IA111 2.7 89 65 ID211 0 1 2 8 9 10 11 12 13 14 15 3 4 5 6 7 0 1 2 3 4 5 90 6 7 8 9 10 11 12 13 14 15 COM COM 2.7 DC24V 7mA 31 32-point Units (Input Units) With Fujitsu-compatible Connector (40-pin × 1) CJ1W-ID231 (112.5) 2.7 66.5 65 ID231 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 1 DC24V 4.1mA 90 1 20 A B 2.
PAGE 24
CJ1W-ID/IA 64-point Units (Input Units) With Fujitsu-compatible Connector (40-pin × 2) CJ1W-ID261 66.5 65 31 2.7 90 2.7 (112.5) With MIL Connector (40-pin × 2) CJ1W-ID262 65 2.7 90 2.7 83.6 31 Related Manuals Name Cat. No.
PAGE 25
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).