Datasheet
CJ1W-AD/DA/MAD
3
Analog I/O Units
Note: The resolution and conversion speed cannot be set independently. If the resolution is set to 1/4,000, then the conversion speed will be 1
ms/point.
Accessories
Mountable Racks
Note: It may not be possible to mount this many Units to a Rack depending on the current consumption of the other Units.
*1 This is the number of Units for a CJ2H-CPU6
@
CJ2H CPU Unit (without EtherNet/IP) and a CJ1W-PA205
@
or CJ1W-PD025 Power Supply Unit.
*2 This is the number of Units for a CJ1W-PA205@ or CJ1W-PD025 Power Supply Unit.
*3 A CP1W-EXT01 CJ Unit Adaptor is required.
*4 This is the number of Units for a NJ501 CPU Unit, and a NJ-PA3001 or NJ-PD3001 Power Supply Unit.
*5 This is the number of Units for a NJ-PA3001 or NJ-PD3001 Power Supply Unit.
Unit type
Product
name
I/O
points
Signal
range
selection
Signal
range
Resolution
Conversion
period
Accuracy at
ambient
temperature
of 25°C
External
connection
No. of
unit
numbers
allocated
Current
consumption
(A)
Model
Standards
5 V
24 V
CJ1
Special
I/O Units
Analog
I/O
Units
4
inputs
Set
separately
for each
input and
output
1 to 5 V,
0 to 5 V,
0 to 10 V,
−
10 to 10 V,
4 to 20 mA
1/4,000
(Settable
to
1/8,000)
1 ms/
point
(Settable
to 500 μs/
point)
Voltage:
±0.2% of F.S.
Current:
±0.2% of F.S.
Removable
terminal
block
10.58− CJ1W-MAD42
UC1, N,
L, CE
2
outputs
Voltage:
±0.3% of F.S.
Current:
±0.3% of F.S.
Model Accessories
CJ1W-AD081-V1/AD041-V1
CJ1W-DA08V/DA08C/DA041/DA021
CJ1W-DA042V
CJ1W-MAD42
None.
CJ1W-AD042
Four jumpers
(For a current input, a jumper is used to connect the current input positive terminal and the voltage input positive terminal.)
Model
NJ system CJ system (CJ1, CJ2) CP1H system NSJ system
CPU Rack
Expansion Rack
CPU Rack
Expansion
Backplane
CP1H PLC NSJ Controller
Expansion
Backplane
CJ1W-AD042 7 Units *4
10 Units *5
(per Expansion
Rack)
8 Units *1
9 Units *2
(per Expansion
Backplane)
2 Units *3 Not supported
9 Units *2
(per Expansion
Backplane)
CJ1W-AD081-V1
9 Units *4
10 Units *5
(per Expansion
Rack)
10 Units *1
10 Units *2
(per Expansion
Backplane)
10 Units *2
(per Expansion
Backplane)
CJ1W-AD041-V1
CJ1W-DA042V
10 Units *4
10 Units *5
(per Expansion
Rack)
CJ1W-DA08V
CJ1W-DA08C
CJ1W-DA041
CJ1W-DA021
CJ1W-MAD42 7 Units *4
10 Units *5
(per Expansion
Rack)
7 Units *1
8 Units *2
(per Expansion
Backplane)
8 Units *2
(per Expansion
Backplane)