Datasheet

10
CJ1W-AD/DA/MAD
Analog Output Units CJ1W-DA021/041/08V/08C/DA042V
Components
*1 The ADJ LED is not provided with the CJ1W-DA042V.
*2 This switch is not mounted for the CJ1W-DA08V, CJ1W-DA08C and CJ1W-DA042V.
Indicators
The indicators show the operating status of the Unit. The following table shows the meanings of the indicators.
* The ADJ LED is not provided with the CJ1W-DA042V.
LED Meaning Indicator Operating status
RUN (green) Operating
Lit Operating in normal mode.
Not lit Unit has stopped exchanging data with the CPU Unit.
ERC (red) Error detected by Unit
Lit Alarm has occurred or initial settings are incorrect.
Not lit Operating normally.
ERH (red) Error in the CPU Unit
Lit Error has occurred during data exchange with the CPU Unit.
Not lit Operating normally.
ADJ (yellow) * Adjusting
Flashing Operating in offset/gain adjustment mode.
Not lit Other than the above.
MACH
No.
DA041
RUN
ERC
ERH
B1 A1
ADJ
x10
1
x10
0
0
9
8
7
6
5
4
3
2
1
0
9
8
7
6
5
4
3
2
1
O
N
12
MODE
Front
With Terminal Block
Terminal block lock lever
(pull down to release terminal block)
Unit number
switches
Indicators *1
Terminal block
Operating mode switch
*2
DIN Track mounting pin
Side
Slider
Slider
Expansion
connector