Datasheet

BF-@(R)/BS-1(T)
4
■ Safety Precautions
Refer to Safety Precautions for All Level Controllers.
HAS
Titanium
Mounting Holes
M18 P = 1.5 (fine screw thread)
M18 × 1.5
( * 2.)
Width across
flats: 20.5
M4 nuts
SUS304
24 dia.
Terminal bolt
SUS304
SUS316
Titanium
HAS B
HAS C
Two, M4
SUS
12
12
17
3
11.5
19
20
101
62
( * 4.)
(*1.)
*1. All of the clamping section is made of fluororesin.
*2. If it is not necessary to seal the tank inside and outside.
The Electrode can be secured with F03-18 Nuts.
*3. The material of the Connecting Nuts is the same as the
material of the BS-1T. Connecting Nuts made of HAS B,
HAS C, or titanium, however, do not have the screw or
screw hole labeled 2-M4 in the figure.
*4. The section shown with dotted lines is sold separately.
Connecting nut (provided)
(
*3.)
BS-1T
Material SUS304 SUS316 Titanium HAS B HAS C
Weight Approx. 55 g Approx. 55 g Approx. 45 g Approx. 65 g Approx. 60 g
(Refer to page 1.)
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.