Datasheet

BF-@(R)/BS-1(T)
2
■ Appearance
Note: 1. The F03-11 Protective Cover (sold separately) is available.
2.
3. Clamp screws are not provided for HAS B, HAS C, or titanium Electrode Holders. When placing an order, specify the type of material
from the following five: SUS304, SUS316, HAS B, HAS C, or Titanium.
■ Accessories Required for Connecting Electrodes to the BF-@(R)
(Order Separately)
Model Material at tightening
section
Screws
BS-1 Iron M18 P = 1.5
BS-1S SUS304 M18 P = 1.5
BS-1S-1 SUS304 PT1/2
BS-1S2 SUS316 M18 P = 1.5
Electrode Shorter
than 1 m
The following items are required for
each pole.
• 1 × F03-01 Electrode
• 1 × F03-03 Lock Nut
The Electrode can be cut anywhere
to a desired control level.
Electrode Longer
than 1 m
The following items are required for
every additional meter of electrode
for each pole.
• 1 × F03-01 Electrode
• 1 × F03-02 Connecting Nut
• 2 × F03-03 Lock Nuts
Use F03-14 1P Separators to
prevent the electrodes from
touching each another.
Note: 1. The spring washer comes with the lock nut.
Contact your OMRON representative to purchase a replacement if the spring washer wears out or is lost.
2. Refer to F03-
@ for details on Electrodes, Connecting Nuts, Lock Nuts, and Separators.
S
a
t
u
r
a
t
e
d
v
a
p
o
r
t
e
m
p
e
r
a
t
u
r
e
0.400.8 1.6 2.0 2.4
100
150
200
1.2
Pressure (MPa)
Temperature
(°C)
Pressure-Temperature Curve
Example
For a pressure of 1.6 MPa, the temperature inside
the water tank must be at least 200°C.
Heat resistance: 70°C
Heat resistance: 150°C
Tightening torque:
2.25 N·m
BF-1
Heat resistance: 70°C
Heat resistance: 150°C
(See note 1.)
Tightening torque:
2.25 N·m
BF-3(R)
BF-5(R)
Heat resistance: 150°C
Heat resistance: 250°C
Maximum terminal
tightening torque:
137.2 N·cm
Material at
clamping section:
iron (standard)
SUS304 and
SUS316 are also
available.
(See note 2.)
BS-1
SUS HAS
Titanium
(See note 3.)
BS-1T
M4 screw
tightening torque:
2.19 N·m
Spring washer
(See note 1.)
Lock nut
Electrode
BF-@(R)
Separator (for 1-pole)
Lock nut
Electrode
Spring washer
Connecting nut