Datasheet
M-7
Enabling Switch
Emergency Stop Switch
(A4EG-BE2R041 only)
Pushbutton
(A4EG-BM2B041 only)
Degree of Protection: IP66 IP65 IP65
Operating Section Strength: Operating direction: 200 N, 1 min. Operating direction: 367 N, 1 min.
Rotating direction: 0.49 N-m, 1 min.
Operating direction: 50 N, 1 min.
Cable Pull Strength: 30 N, 1 min. 30 N, 1 min. 30 N, 1 min.
Allowable Operating Frequency
Electrical: 20 operations/min. max. 10 operations/min. max.
(set/reset for one operation)
60 operations/min. max.
Mechanical: 20 operations/min. max. 10 operations/min. max.
(set/reset for one operation)
120 operations/min. max.
Electrical Durability (rated load): 100,000 operations min. 100,000 operations min.
(set/reset for one operation)
100,000 operations min.
Mechanical Durability: OFF-ON-OFF (direct opening):
100,000 operations min.
OFF-ON: 1,000,000 operations min.
100,000 operations min.
(set/reset for one operation)
2,000,000 operations min.
Dielectric Strength:
Between terminals of the same polarity 2,500 VAC, 50/60 Hz, 1 min.
(impulse voltage)
1,000 VAC, 50/60 Hz, 1 min. 1,000 VAC, 50/60 Hz, 1 min.
Between terminals of different polarities 2,500 VAC, 50/60 Hz, 1 min.
(impulse voltage)
2,000 VAC, 50/60 Hz, 1 min. 2,000 VAC, 50/60 Hz, 1 min.
Between each terminal and non-current
carrying metallic parts
2,500 VAC, 50/60 Hz, 1 min.
(impulse voltage)
2,000 VAC, 50/60 Hz, 1 min. 2,000 VAC, 50/60 Hz, 1 min.
Insulation Resistance: 100 MΩ min. (at 500 VDC)
Vibration Resistance: Malfunction: 1.5 mm double amplitude, 10 to 55 Hz
Shock Resistance: Malfunction: 150 m/s² max.
Ambient Operating Temperature: -10 to 55°C (with no icing or condensation)
Ambient Operating Humidity: 35% to 85%
Ambient Storage Temperature: -25 to 65°C (with no icing or condensation)
Protection Against Electric Shock: Class II (double insulation)
Pollution Degree (Operating
Environment):
3 (EN 60947-5-1)
Conditional Short-Circuit Current: 100 A (EN 60947-5-1)
Note: The timing of contact outputs for two or more circuits is not synchronized. Confirm performance before application.
Specifications are subject to change without notice.
A4EG Enabling Switch Devices
2
Specifications
Characteristics