Datasheet

ManualsBrandsOmron Industrial Automation ManualsSwitch Assembly HardwareMounting bracket

M-6

Enabling Switch Devices

A4EG

Enabling Grip Switch with

Distinct Feel for Three Easily

Discernible Positions

• The difﬁcult task of conﬁguring safety circuits is now easily

achieved by combining the A4EG with the G9SX-GS.

• In addition to the standard models, the lineup also includes

models with an emergency stop switch and models with a

momentary operation switch.

• An optional Holding Key (sold separately) provides a versatile

method for selecting modes.

• Equipped with conduit connector.

Speciﬁcations

Standards and EC Directives

Compliance with EC Directives and International Standards

• Low Voltage Directive

• GS-ET-22

Certiﬁed Standards

Certifying body Standard File No.

TÜV SÜD

EN 60947-5-1

(certiﬁed direct opening)

Ask your Omron

representative.

UL * UL 508, CSA C22.2 No.14 E76675

CQC (CCC) GB 14048.5 Pending approval

Certiﬁcation for CSA C22.2 No. 14 by UL is indicated by the registration

mark.

Certiﬁed Standard Ratings

(Enabling Switch Section)

TÜV (EN 60947-5-1)

Utilization category AC-15 DC-13

Rated operating current (Ie) 0.75 A 0.55 A

Rated operating voltage (Ue) 240 V 125 V

Note: Use a 10 A fuse type gI or gG that conforms to IEC 60269 as the

short-circuit protection device. The fuse is not built into the Switch

UL/CSA (UL 508, CSA C22.2 No.14), CCC (GB 14048.5)

• 24 VDC, 0.3 A (inductive load)

• 125 VAC, 1 A (resistive load)

Ratings

Enabling switch

Emergency stop switch

(A4EG-BE2R041 only)

Pushbutton

(A4EG-BM2B041 only)

Rated insulation voltage 250 V ---

Rated ON current 2.5 A 5 A 0.1 A

Rated load

24 VDC, 0.3 A (inductive load)

125 VAC, 1 A (resistive load)

EN certiﬁcation rating:

AC-15 0.75 A/240 V

DC-13 0.55 A/125 V

General rating:

125 VAC, 5 A (resistive load)

250 VAC, 3 A (resistive load)

30 VDC, 3 A (resistive load)

UL and cUL rating:

125 VAC, 5 A

(inductive load, power factor: 0.75 to 0.8)

250 VAC, 3 A

(inductive load, power factor: 0.75 to 0.8)

30 VDC, 3 A (resistive load)

EN certiﬁcation rating:

AC-12 3 A/250 V

DC-12 3 A/30 V

General rating:

125 VAC, 0.1 A (resistive load)

8 VDC, 0.1 A (resistive load)

14 VDC, 0.1 A (resistive load)

30 VDC, 0.1 A (resistive load)

UL and cUL rating:

125 VAC, 0.1 A

(resistive load)

30 VDC, 0.1 A (resistive load)

EN certiﬁcation rating:

AC-12 0.1 A/125 V

DC-12 0.1 A/30 V

Minimum applicable load 24 VDC, 4 mA 5 VDC, 1 mA

Summary of content (9 pages)

PAGE 1
Enabling Switch Devices A4EG Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions • The difficult task of configuring safety circuits is now easily achieved by combining the A4EG with the G9SX-GS. • In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch. • An optional Holding Key (sold separately) provides a versatile method for selecting modes. • Equipped with conduit connector.
PAGE 2
A4EG Enabling Switch Devices Specifications Characteristics Enabling Switch Emergency Stop Switch (A4EG-BE2R041 only) Pushbutton (A4EG-BM2B041 only) Degree of Protection: IP66 IP65 IP65 Operating Section Strength: Operating direction: 200 N, 1 min. Operating direction: 367 N, 1 min. Operating direction: 50 N, 1 min. Rotating direction: 0.49 N-m, 1 min. Cable Pull Strength: 30 N, 1 min. 30 N, 1 min. 30 N, 1 min. Electrical: 20 operations/min. max. 10 operations/min. max.
PAGE 3
A4EG Enabling Switch Devices Structure and Nomenclature Structure Three Positions: OFF – ON – OFF A4EG-BE2R041 A4EG-BM2B041 A4EG-C000041 Position 1 Position 2 Not Gripped Emergency Stop Switch Section/ Pushbutton Switch Section Enabling Switch Section Gripped past Middle Position Gripped lightly Terminal 2 Terminal 3 Terminal 2 Terminal 3 Terminal 1 Terminal 4 Terminal 1 Terminal 4 Terminal 5 Terminal 8 Terminal 6 Terminal 7 Terminal 5 Position 3 Gripped to Middle Position OFF ON
PAGE 4
A4EG Enabling Switch Devices Dimensions (mm) Structure (continued) A4EG-BM2B041 A4EG-C000041: Dimensions are similar to A4EG-BM2B041 without Pushbutton Switch. A4EG-BE2R041: Dimensions are similar to A4EG-BM2B041. The A4EG-BE2R041 has an Emergency Stop Switch instead of a Pushbutton Switch. See “Installation Manual” for A4EG-C000041 and A4EG-BE2R041 dimensions.
PAGE 5
A4EG Enabling Switch Devices Application Example Wiring Example Settings (For details, refer to section 3 of the G9SX User’s Guide (Cat. No. Z255).) G9SX-BC: Manual reset, cross fault detection: ON (category 4 wiring) G9SX-GS: Manual reset, cross fault detection: ON (category 4 wiring), logical AND connection setting: AND ON-delay time setting: Time is set.
PAGE 6
A4EG Enabling Switch Devices Ordering Enabling Grip Switches Contact Form Appearance Enabling Switch Monitor Switch Pushbutton Switch Model Two contacts 1 NC (grip output) None A4EG-C000041 Two contacts None Emergency stop switch (2 NC) A4EG-BE2R041 Two contacts None Momentary operation switch (2 NO) A4EG-BM2B041 Accessories (Order Separately) Appearance Item Model Rubber Cover A4EG-OP1 Mounting Bracket (for securing the A4EG) A4EG-OP2 Holding Key A4EG-OP3 M-11 6
PAGE 7
A4EG Enabling Switch Devices Ordering (continued) Cabling Accessories (Order Separately) Appearance Cables Model SC09-9M340, cable, 4-pin Micro Male, 10 m 44509-0340 SC09-9M330, cable, 4-pin Mini Male, 10 m 44509-0330 SC09-9M320, cable, 8-pin Mini Male, 9 m 44509-0320 SC09-9M310, cable, 10-pin Mini Male, 9 m 44509-0310 Extension Cables SC09-10M140, Extension cord, 4-pin male mini / 4-pin female mini, 10 m 44509-0140 SC09-10M142, Extension cord, 4-pin male micro / 4-pin female micro, 10 m 445
PAGE 8
Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”).
PAGE 9
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Hoffman Estates, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L.