Datasheet

A22E/A22NE-P
35
A22E A22NE-P
Common Note
Common Accessories and Tools
12
2R
M90
353
20.6
22.2 dia.
2.8
79 dia.
98 dia.
105 dia.
Detents
inside
(One on
each side)
95
+0.2
0
5.5
+0.2
0
90.3
+0.4
0
dia.
20
23
10
13
Panel Panel
SpacersSpacer
105 max.
1b Contact Unit
Position of
detent
notch
Position of
detent
notch
Panel
The number of spacers depends on the model
A22Z-EG2 : No Spacer
A22Z-EG21 : 1 Spacer
A22Z-EG22 : 2 Spacers
88 max.
Position of
detent
notch
Position of
detent
notch
Panel
Panel
2b One-Piece
Contact Unit
2b One-Piece
Contact Unit
72 max.
With 1 Spacer With 2 Spacers
Screw Terminal Block Type
Mounting a 1-pole Switch Unit *
Screw Terminal Block Type
Mounting a 2-pole Switch Unit *
Push-in Plus Terminal Block Type
Mounting a 1-pole Switch Unit *
Push-in Plus Terminal Block Type
Mounting a 2-pole Switch Unit *
Panel Cutout Dimensions
* These are the dimension from the front of the panel when the Switch Unit is attached.
During spacer attachment
E-stop Shrouds
A22Z-EG2, A22Z-EG21, A22Z-EG22
Note: 1. The dimensions of the Shroud conform to the
specifications of the SEMATECH Application Guide
for SEMI S2-93.
2. The Shroud is not provided with the Switch.
3. Tighten to a torque of 1.96 to 2.94 N⋅m.
4. The allowable panel thicknesses are as follows:
Without Spacers: t=1.3 to 22.5 mm
With 1 Spacer: t=1.3 to 12.5 mm
With 2 Spacers: t=1.3 to 2.5 mm