Datasheet
A22NE-P
20
A22E A22NE-P
Common Accessories and Tools
Common Note
Accessories (Order Separately)
Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types, refer to "Common
Accessories and Tools (Order Separately)" on page 32.
* The A22NZ-A-B01Y Control Box cannot be used in combination with the A22Z-3476-1 90-dia. Legend Plates for Emergency Stop or the A22Z-
EG@ E-stop Shrouds.
Item Appearance Contact specifications Model Remarks
Switch Blocks
(one contact)
1NO (Blue) Standard load A22NZ-S-P1AN
Provided as standard.
Order Switch Blocks only when
adding or replacing them.
1NC (Red) Standard load A22NZ-S-P1BN
Switch Blocks
(two contacts)
2NC (Red) Standard load A22NZ-S-P2BN
Order Switch Blocks only when
adding or replacing them.
1NO/1NC
(White)
Standard load A22NZ-S-P2CN
Lighting unit
6 VAC/VDC A22NZ-T-APN
These are provided with the
completely assembled set of
lighted models. Order Lighting
Units only when replacing them.
12 VAC/VDC A22NZ-T-BPN
24 VAC/VDC A22NZ-T-CPN
100, 110, 120 VAC A22NZ-T-DPN
200, 220, 230, 240 VAC A22NZ-T-EPN
Mounting
Latches
--- A22NZ-H-02
This Mounting Latch is for
exclusive use with the A22NE-P.
It is provided with the completely
assembled set.
Order Mounting Latches only
when mounting Switch Blocks or
Lighting Units that are
purchased individually.
Control Boxes
(Enclosures)
One hole, yellow box A22NZ-A-B01Y
Material: Polycarbonate resin.
Can be combined with 1-contact
Switch Blocks.
(Cannot be combined with
2-contact Switch Blocks.)
*