Datasheet

A22E
G-309A22E
Accessories (Order Separately)
Item Appearance Classification Model Remarks
Switch Blocks
SPST-NO A22-10
Provided as standard. Order Switch
Blocks only when adding or replacing
them.
SPST-NC A22-01
Lamp Sockets
Direct lighting A22-TN
Used when changing the lighting
method.
Voltage-
reduction
lighting
110 VAC A22-T1
220 VAC A22-T2
Mounting Latches
For momentary-action
models
A22-3200
Provided as standard. Order Mounting
Latches only when mounting Switch
Blocks or Lamp Sockets that are pur-
chased individually.
For alternate-action models A22-3210
Lock Ring Rounded shape A22Z-3360
The body is equipped with a Lock Fit-
ting. This Lock Fitting is used when a
more secure lock feature is required.
Hole Plug Round A22Z-3530
Can be plugged into pre-cut panel
holes for future expansion. The color is
black.
Control Boxes
(Enclosures)
One hole A22Z-B101
Material: Polycarbonate resin
One hole, yellow box
(for emergency stop)
A22Z-B101Y
Two holes A22Z-B102
Three holes A22Z-B103
Connectors
Applicable ca-
ble diameter
(mm)
7 to 9 dia. A22Z-3500-1
Plastic connector used to extend
a cable from the Switch Box.
9 to 11 dia. A22Z-3500-2
25-dia. Ring ––– A22Z-R25
Can be fit into a 25-dia. hole in the
panel.
Since this is not attached to the main
body, order separately.
Legend Plates for Emer-
gency Stop
60-dia. black letters on yel-
low back-ground
A22Z-3466-1
“EMERGENCY STOP” is indicated on
the plate.
90-dia. black letters on yel-
low back-ground
A22Z-3476-1
Lamp Extractor ––– A22Z-3901
Rubber tool used to replace Lamps
easily
Tightening Tool ––– A22Z-3905
Tool used to tighten nuts from the back
of the panel
Lock Plate
--- A22Z-3380 Use to fix the lever on the Switch.