Datasheet

A165S/W
9
Nomenclature
Model structure
For information on rotating the flange, refer to page 14.
Example: Knob-type Selector Switch with Two Notches
(Standard condition when shipped)
Note: The angle is 75° for self-resetting models.
The flange can be rotated to easily change the
operation angle of the knob.
S
peci
f
ications
Operation Angle Contact Form
(75°)
Two notches Three notches
90°
FP
FP
45°
(45°)
45°
(45°)
Note: The angle used for automatic reset is
shown in parentheses.
FP: Free Position
No. of
notches
Contact from
SPDT DPDT
Posi-
tion
SW
Posi-
tion
SW2 SW1
2 notches
3 notches
---
SW1SW2
●Color of Selector
· LED models
Red Yellow Green
· Non-lighted models
Black
●Lighting Method
· Lighted (LED) models
(The upper face of the
knob is illuminated.)
· Non-lighted models
●Number of Notches and Reset Method
· 2 Notches: Manual reset, Automatic reset
· 3 Notches: Manual reset, Automatic reset
●Switch Specifications
5 A at 125 VAC
5 A at 250 VAC
3 A at 30 VDC
Minimum applicable load:
1 mA at 5 VDC
●Flange Shape
Rectangular
(A165@-J)
●Protective
Structure
Oil-resistant IP65
●Terminal Type
Solder terminals
PCB terminals
Square
(A165@-A)
Round
(A165@-T)
Selector
Switch
90°
(75°)
90° 90°
FP