Datasheet

A165S/W
8
Specifications
Approved Standard Ratings
Ratings
Switch Ratings
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20±2°C
4. Operating frequency: 20 times/min
Contact Form
Super-bright LED
Characteristics
Socket Unit
* With LED not mounted.
(Perform testing with the LED not mounted.)
Screw-less Clamp
Operating Characteristics
UL, cUL (File No. E41515) TÜV (EN60947-5-1) (Low Voltage Directive)
CCC (GB14048.5)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Switch.
For detailed information on individual products that
have received certification, consult your supplier.
3 A at 250 VAC
3 A at 30 VDC
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Rated voltage Resistive load
125 VAC 5 A
250 VAC 3 A
30 VDC 3 A
Name Contact form
SPDT
Rated
voltage
Rated
current
Operating
voltage
Internal limiting
resistor
5 VDC
8 mA
5 VDC±5%
Red, yellow: 300 Ω
Green: 160 Ω
12 VAC/VDC 12 VAC/VDC ± 5%
Red, yellow: 1 kΩ
Green: 910 Ω
24 VAC/VDC 24 VAC/VDC ± 5% 2.4 k Ω
COM
NC
NO
Item Type Knob-type Selector Switch
Allowable
operating
frequency
Mechanical 20 operations/minute max.
Electrical 10 operations/minute max.
Insulation resistance 100 MΩ min. (at 500V DC)
Contact resistance 100 mΩ max. (initial value)
Dielectric
strength
Between termi-
nals of same
polarity
1,000 VAC, 50/60 Hz for 1 min
Between ter-
minals of dif-
ferent polarity
2,000 VAC, 50/60 Hz for 1 min
Between each
terminal and
ground
2,000 VAC, 50/60 Hz for 1 min
Between lamp
terminals
1,000 VAC, 50/60 Hz for 1 min*
Vibration
resistance
Malfunction
10 to 55 Hz, 1.5-mm double amplitude
(malfunction within 1 ms)
Shock
resistance
Destruction 500 m/s
2
max.
Malfunction
150 m/s
2
max.
(malfunction within 1 ms)
Durability
Mechanical 250,000 operations min.
Electrical 100,000 operations min.
Electric shock protection
class
Class II
PTI (tracking characteristic) 175
Degree of contamination 3 (IEC60947-5-1)
Weight
Approx. 13 g
(in the case of a lighted DPDT switch)
Ambient operating
temperature
−10°C to 55°C
(with no icing or condensation)
Ambient operating
humidity
35% to 85%RH
Ambient storage
temperature
−25°C to 65°C
(with no icing or condensation)
Item Type Screw-less Clamp
Recommended
wire size
0.5 mm
2
twisted wire or 0.8 mm-dia. solid wire
Usable
wires
and
tensile
strength
Twisted
wire
0.3 mm
2
0.5 mm
2
0.75 mm
2
1.25 mm
2
Solid
wire
0.5 mm dia. 0.8 mm dia. 1.0 mm dia. ---
Tensile
strength
10 N 20 N 30 N 40 N
Length of exposed
wire
10 ±1 mm
Compliant
standards
JIS C 2811 Terminal Blocks for Industrial Use
Type
Characteristics
Knob-type Selector Switch
2 notches 3 notches
Operating torque (OF) max. 0.1 N·m
Set position (SP) 90±5° 45°
+10
0