Datasheet

A165S/W
14
Dimensions (Unit: mm)
Non-lighted Models with PCB Terminals (Lamp terminals are not provided with the Non-lighted Knob-type Selector
Switches and Key-type Selector Switches.)
For details on mounting the Switch to a panel, and mounting and dismounting the Switch, refer to
installation details for the A16 Pushbutton Switch.
Flange Rotation (All Selector Switches)
Non-lighted SPDT Switches Non-lighted DPDT Switches
Model, rating, and lot
number indication
Dimensions of
PCB Terminals
Terminal Arrangement
(Bottom View)
18.6
1.5
3.5
5.3
2.7
0.8
12.4
Side with TOP
indicated
NC
NO
COM
SW1
12.4±0.05
20±0.1
6.3±0.05
Three, 1 dia.
Two, 5 dia.
Side with TOP indicated
PCB Cutouts
(Bottom View)
A±0.1
L±0.1
A = 24 min.: Rectangular
A = 21 min.: Square/Round
L = 24 min.
Use t = 1.6 for the PCB.
Note: Secure the panel to the board using stud bolts if force will
be applied to the board after wiring.
1.5
3.5
5.3
2.7
0.8
18.6
12.4
Side with TOP
indicated
NC
NO
COM
NC
NO
COM
SW2
SW1
Dimensions of
PCB Terminals
Terminal Arrangement
(Bottom View)
12.4±0.05
20±0.1
6.3±0.056.3±0.05
Six, 1 dia.
Two, 5 dia.
A±0.1
L±0.1
Side with TOP indicated
PCB Cutouts
(Bottom View)
A = 24 min.: Rectangular
A = 21 min.: Square/Round
L = 24 min.
Use t = 1.6 for the PCB.
Note: Secure the panel to the board using stud bolts if force will
be applied to the board after wiring.
Flange
Lock ring
Switch screw
Flange
Lock ring
Switch screw
A165 Knob-type Selector Switch
Fix the Switch screw and rotate the flange in
45° turns.
A165 Key-type Selector Switch
Fix the Switch screw and rotate the flange in
45° turns.