Manualshelf

Datasheet

ManualsBrandsOmron Industrial Automation ManualsRotary SwitchesRotary Switch, 2 Poles, 2 Positions, 90°, Panel Mount
891011121314151617
A165S/W
12
Dimensions (Unit: mm)
Panel Cutouts
Models with Solder Terminals and Models with Screw-less Clamp Connectors
Models with PCB Terminals
Terminal Arrangement
Models with Solder Terminals without Reduced-voltage Lighting (Lamp terminals are not provided with the Non-lighted
Knob-type Selector Switches and Key-type Selector Switches.)
Rectangular A165@-J Square A165@-A, Round A165@-T
Note: 1. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm.
2. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
3. Figures in parentheses are for screw-less clamp connectors.
Rectangular A165@-J Square A165@-A, Round A165@-T
Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0.1 mm.
2. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the thickness of the mounting panel must
be 0.5 to 2 mm.
3. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
Lighted SPDT Switches Lighted DPDT Switches
Non-lighted SPDT Switches Non-lighted DPDT Switches
24 min.
(25 min.)
19 min.
(33 min.)
(Top View)
16 dia.
+0.2
0
19 min.
(25 min.)
16 dia.
+0.2
0
19 min.
(33 min.)
(Top View)
24 min.
24 min.
14.7±0.05 dia.
9.1±0.05
5.1±0.05
(Top View)
16 dia.
+0.2
0
24 min.
24 min.
9.1±0.05
5.1±0.05
14.7
±0.05 dia.
(Top View)
16 dia.
+0.2
0
2.6
0.9
1.5
2.8
Lamp terminal
12.2
18
7.4
NC
L-
NO
COM
SW1
Dimensions of
Terminal Holes
Terminal Arrangement
(Bottom View)
Note: The L+ is not shown
on the Switch.
2.6
0.9
1.5
2.8
Lamp terminal
12.2
18
7.4
NC
NO
COM
NC
L-
NO
COM
SW2SW1
Dimensions of
Terminal Holes
Terminal Arrangement
(Bottom View)
Note: The L+ is not shown
on the Switch.
2.6
0.9
1.5
2.8
12.2
18
7.4
Side with TOP
indicated
NC
NO
COM
SW1
Dimensions of
Terminal Holes
Terminal Arrangement
(Bottom View)
2.6
0.9
1.5
2.8
12.2
18
7.4
Side with TOP
indicated
NC
NO
COM
NC
NO
COM
SW2
SW1
Dimensions of
Terminal Holes
Terminal Arrangement
(Bottom View)