Datasheet

A16
22
Dimensions (Unit: mm)
PCB Terminals (Lamp terminals are also present on non-lighted models.)
Terminal Arrangement
Voltage-reduction Lighting (Lamp terminals are also present on non-lighted models.)
Solder Terminals Screw-Less Clamps
Lighted SPDT Switches Lighted DPDT Switches
DPDT lighted models DPDT lighted models
• The voltage-reduction circuit is built in. • Voltage-reduction lighting models with Screw-Less Clamps (A16L-@T1-2S, A16L-@T2-2S)
incorporate voltage-reduction circuits.
Model, rating, and lot
number indication
Terminal Arrangement
(Bottom View)
Dimensions of
PCB Terminals
4.85
18.6
Lamp terminal (t=0.5)
1.5
3.5
5.3
2.7
0.8
12.4
Side with TOP indicated
NC
L-
NO
COM
SW 1
Side with TOP indicated
A ± 0.1
L ± 0.1
Two, 5 dia.
Five, 1 dia.
20 ± 0.1
4.85 ± 0.05
6.3 ± 0.05
PCB Cutouts
(Bottom View)
A = 24 min.: Rectangular
A = 21 min.: Square or round
L = 24 min.
Use a PCB with a thickness of 1.6 mm.
12.4 ± 0.05
Note: Secure the panel to the board using stud bolts
if force will be applied to the board after wiring.
1.5
3.5
5.3
2.7
0.8
4.85
18.6
12.4
Lamp terminal (t=0.5)
Terminal Arrangement
(Bottom View)
Dimensions of
PCB Terminals
Side with TOP indicated
NC
NO
COM
NC
L-
NO
COM
SW 2SW 1
Eight, 1 d
Two, 5 dia.
A ± 0.1
L ± 0.1
6.3 ± 0.056.3 ± 0.05
12.4 ± 0.05
Side with TOP indicated
PCB Cutouts
(Bottom View)
4.85 ± 0.05
20 ± 0.1
A = 24 min.: Rectangular
A = 21 min.: Square or round
L = 24 min.
Use a PCB with a thickness of 1.6 mm.
Note: Secure the panel to the board using stud bolts
if force will be applied to the board after wiring.
Side with direction arrow
(Bottom view)
NCNC
NONO
SW1 SW2
CC
L
L
Red (Release button)
White (Release button)
Black (Release button)
Black (Release button)
Red (Release button)
White (Release button)
Black (Release button)
Black (Release button)
Red (Release button)
Black (Release button)
NC1
NO1
C1
C1
NC2
Side indicating TOP
NO2
C2
-
+
C2 +
12-3.1 dia. (Insertion hole)
SW1 SW2