Datasheet

21
A16
Dimensions (Unit: mm)
Panel Cutouts
Solder Terminals and Screw-less Clamp Connectors PCB Terminals
Terminal Arrangement
Models without Reduced-voltage Lighting (Non-lighted Pushbutton Switches are also provided with lamp terminals.)
Solder Terminals
Rectangular A16 @ - @ J/M16 @ - @ J
Square A16@-A/M16@-A
Round A16@-T/M16@-T
Rectangular A16@-J/M16@-J
Square A16@-A/M16@-A
Round A16@-T/M16@-T
(Top View) (Top View) (Top View) (Top View)
Note:• Make sure the thickness of the mounting panel is between 0.5 and 3.2
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
• If the panel is to be finished with coating, etc., make sure that the panel
meets the specified dimensions after coating.
• Figures in parentheses are for Screw-less Clamp Connectors.
Note:• Ensure that the variation in the distance between the centers of
neighboring mounting holes is less than ±0.1 mm.
• Make sure the thickness of the mounting panel is between 0.5 and 3.2
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
• If the panel is to be finished with coating, etc., make sure that the panel
meets the specified dimensions after coating.
Lighted SPDT Switches Lighted DPDT Switches
24 min.
(25 min.)
19 min.
(33 min.)
16 dia.
+0.2
0
19 min.
(33 min.)
19 min.
(25 min.)
16 dia.
+0.2
0
9.1 ± 0.05
5.1 ± 0.05
14.7 ± 0.05 dia.
24 min.
24 min.
16 dia.
+0.2
0
16 dia.
+0.2
0
19 min.
(33 min.)
19 min.
(25 min.)
Terminal Arrangement
(Bottom View)
Dimensions of
Terminal Holes
Note: The L+ is not shown on the Switch.
2.6
0.9
1.5
2.8
Lamp terminal
12.2
18
7.4
NC
L-
NO
COM
SW1
2.6
0.9
1.5
2.8
12.2
18
7.4
NC
NO
COM
NC
L-
NO
COM
SW2SW1
Terminal Arrangement
(Bottom View)
Dimensions of
Terminal Holes
Note: The L+ is not shown on the Switch.
Lamp terminal