Datasheet

ManualsBrandsOmron Industrial Automation ManualsEmergency Stop SwitchesEmergency Stop Switch 1NC 250 VAC 3 A

G-283A165E

A165E

Emergency Stop Switch

A165E

Mounting Aperture of

16 mm

• Modular construction, easy installation

• Direct opening mechanism with mini-

mum contact separation of 3 mm in ac-

cordance with EN60947-5-1, . (only

for NC contacts)

• Conforms to EN418, EN60947-5-1.

• Includes a safety lock to prevent mis-

use.

• Features separate construction that al-

lows the Switch to be separated for

easier wiring and one-piece-like con-

struction that allows easier handling.

• High reliability, IP65

• Short mounting depth, less than 28.5

mm below panel

• Quick and easy assembly, snap-in

Switch.

• A165E is identifiable, clearly visible

and will stop a dangerous process,

without creating additional hazards.

Model Number Structure

Model Number Legend

1. Lighted/Non-lighted

None: Non-lighted

L: Lighted

2. Head Size

S: 30 mm dia.

M: 40 mm dia.

3. Illumination (Operation Voltage/Rated Voltage)

None: Non-lighted

24D: LED (24 VDC)

4. Contacts

01: SPST (NC)

02: DPST (NC)

03U: TPST (NC)

One-body, non-lighted models only

1 2 3 4

A165E-##-#-#

F502-EN2-04.book Seite 283 Dienstag, 26. Juli 2005 5:48 17

Summary of content (8 pages)

PAGE 1
F502-EN2-04.book Seite 283 Dienstag, 26. Juli 2005 5:48 17 Emergency Stop Switch A165E Mounting Aperture of 16 mm • Modular construction, easy installation • Direct opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Æ . (only for NC contacts) • Conforms to EN418, EN60947-5-1. • Includes a safety lock to prevent misuse. • Features separate construction that allows the Switch to be separated for easier wiring and one-piece-like construction that allows easier handling.
PAGE 2
F502-EN2-04.book Seite 284 Dienstag, 26. Juli 2005 5:48 17 Ordering Information List of Models Illumination Rated voltage LED 24 VDC None --- LED 24 VDC Pushbutton color Pushbutton size Terminal Contact 30 dia. Red Solder terminal 40 dia.
PAGE 3
F502-EN2-04.book Seite 285 Dienstag, 26. Juli 2005 5:48 17 Ratings Switch Ratings Resistive load A165E#-U series A165E series 5A 1A 3A 0.
PAGE 4
F502-EN2-04.book Seite 286 Dienstag, 26. Juli 2005 5:48 17 Nomenclature \ Illumination Colors ∑ LED Illumination Red ∑ Non-lighted Red Protective Structure and Terminal Type ∑ Protective Structure Oil-resistant IP65 ∑ Terminal Type Solder terminals (tab terminals #110) Illumination Method ∑ LED Lamp ∑ LED lamp Switch Specifications ∑ Standard Loads 5 A at 125 VAC 3 A at 250 VAC 3 A at 30 VDC Note: A165E Emergency Stop Switch must be ordered as a set. No LED is installed for the non-lighted model.
PAGE 5
F502-EN2-04.book Seite 287 Dienstag, 26. Juli 2005 5:48 17 Dimensions Note: All units are in millimeters unless otherwise indicated. A165E 30 dia. Mounting ring Packing (T0.5) 7.8+0.3 0 dia. Non-lighted models 30 mm diameter 3+0.1 0 dia. Panel cutout dimensions Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. Lock ring Lock 2. Recommended panel thickness: 0.5 to 3.2 mm. 16+0.2 0 dia. 22.1±0.8 A165E 30 dia.
PAGE 6
F502-EN2-04.book Seite 288 Dienstag, 26. Juli 2005 5:48 17 A165E 40 dia. Non-lighted models 40 mm diameter Mounting ring Packing (T0.5) Lock ring Lock 2.6 1.4 Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. Panel cutout dimensions 18 12.1 7.8+0.3 0 dia. 2.8 3+0.1 0 dia. 16+0.2 0 dia. 15.8 12.3 0.5 M16¥1 Switch 2. Recommended panel thickness: 0.5 to 3.2 mm. 10.8±0.5 20±0.8 21.1±0.8 28.5±0.
PAGE 7
F502-EN2-04.book Seite 289 Dienstag, 26. Juli 2005 5:48 17 Accessories Yellow Plate (Vinyl Chloride) Panel Plugs Select an appropriate Panel Plug according to the panel design and mount from the front side of the panel. Panel cutout dimensions are the same as those for the Switch. A16Z-5070 Rectangular Round Screw Fitting 15.6 dia. 45 dia. Square t=1 A16Z-3004 Lock Ring 18 dia. Rough surface 15.8 ±0.1 dia. 12 ¥ 12 Rough surface 0 15 dia. -0.
PAGE 8
F502-EN2-04.book Seite 290 Dienstag, 26. Juli 2005 5:48 17 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A120-E2-03A-X G-290 In the interest of product improvement, specifications are subject to change without notice.