Datasheet

12 DC Power Relays (200-A Models) G9EC-1
Specifications
■ Ratings
Coil
Note: 1. The figures for the rated current and coil resistance are for a coil temperature of 23°C and have a tolerance of ±10%.
2. The figures for the operating characteristics are for a coil temperature of 23
°C.
3. The figure for the maximum voltage is the maximum voltage that can be applied to the relay coil.
Contacts
■ Characteristics
Note: 1. The above values are initial values at an ambient temperature of 23°C unless otherwise specified.
2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method.
3. The insulation resistance was measured with a 500-VDC megohmmeter.
4. The impulse withstand voltage was measured with a JEC-212 (1981) standard impulse voltage waveform (1.2
× 50 µs).
5. The mechanical endurance was measured at a switching frequency of 3,600 operations/hr.
6. The electrical endurance was measured at a switching frequency of 60 operations/hr.
Rated voltage Rated current Coil resistance Must-operate
voltage
Must-release
voltage
Maximum voltage
(See note 3.)
Power
consumption
12 VDC 938 mA 12.8
Ω 75% max. of rated
voltage
8% min. of rated
voltage
110% of rated volt-
age (at 23°C within
10 minutes)
Approx. 11 W
24 VDC 469 mA 51.2
Ω
48 VDC 234 mA 204.8 Ω
60 VDC 188 mA 320.0 Ω
100 VDC 113 mA 888.9 Ω
Item Resistive load
G9EC-1(-B)
Rated load 200 A at 400 VDC
Rated carry current 200 A
Maximum switching voltage 400 V
Maximum switching current 200 A
Item G9EC-1(-B)
Contact resistance (See note 2.)
30 mΩ max. (0.2 mΩ typical)
Contact voltage drop 0.1 V max. (for a carry current of 200 A)
Operate time
50 ms max.
Release time
30 ms max.
Insulation resistance
(See note 3.)
Between coil and contacts
1,000 MΩ min.
Between contacts of the same polarity
1,000 MΩ min.
Dielectric strength Between coil and contacts
2,500 VAC, 1 min
Between contacts of the same polarity
2,500 VAC, 1 min
Impulse withstand voltage (See note 4.)
4,500 V
Vibration resistance Destruction
10 to 55 to 10 Hz 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s
2
)
Malfunction
10 to 55 to 10 Hz 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s
2
)
Shock resistance Destruction
490 m/s
2
Malfunction
196 m/s
2
Mechanical endurance (See note 5.)
200,000 operations min.
Electrical endurance (resistive load) (See note 6.)
400 VDC, 200 A, 3,000 operations min.
Short-time carry current 300 A (15 min)
Maximum interruption current 1,000 A at 400 VDC (10 times)
Overload interruption 700 A at 400 VDC (40 times min.)
Reverse polarity interruption
−200 A at 200 VDC (1,000 times min.)
Ambient operating temperature
−40 to 50°C (with no icing or condensation)
Ambient operating humidity 5% to 85%
Weight Approx. 560 g