Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G6S, 2CO, DC, 5V, 0.5/2A/A, 178Ohm

G6S

Surface-mounting Relay

Compact, Industry-Standard 2-pole relay,

designed to switch 2A Signal Loads.

• Long terminals for ideal for soldering and mounting reliability. (Surface

mounting terminal models)

• Space-saving inside-L terminal. (Surface mounting terminal models)

• Unique terminal structure, designed to withstand IRS soldering

processes. (Surface mounting terminal models)

• High dielectric strength (2,000 VAC) and impulse withstand voltage

between coil and contacts (2,500 V, 2 × 10 μs: Telcordia requirements).

• Ultra-miniature at 9.4 mm (H) × 7.5 mm (W) × 15 mm (L).

• Models available with BSI (EN62368-1) supplementary insulation

certification. (-Y type)

■Model Number Legend

■Ordering Information

Surface mounting terminal standard models

Note 1. When ordering, add the rated coil voltage to the model number.

Example: G6S-2F DC3

However, the notation of the coil voltage on the product case as well as on the packing will be marked as @@ VDC.

Note 2.When ordering tape packing, add -TR" to the model number.

Be sure since -TR" is n ot part of the relay model number, it is not marked on the relay case.

Note 3.When ordering tape packing, minimum order unit is 2 reels (400 pcs × 2 = 800 pcs).

Note 4.Surface mounting terminal (SMT) standard models are shipped in moisture-proof package.

RoHS Compliant

Packing Tube Packing Tape Packing

Enclosure rating

Relay Function Contact form Model

Rated coil

voltage

Minimum

packing unit

Model

Rated coil

voltage

Minimum

packing unit

Minimum ordering unit

(tape packing)

Fully sealed

Single-side

stable

DPDT (2c)

G6S-2F

G6S-2G

3 VDC

50 pcs/tube

G6S-2F-TR

G6S-2G-TR

3 VDC

400 pcs/reel 800 pcs/2 reels

4.5 VDC 4.5 VDC

5 VDC 5 VDC

12 VDC 12 VDC

24 VDC 24 VDC

G6S-2F-Y

G6S-2G-Y

5 VDC

G6S-2F-Y-TR

G6S-2G-Y-TR

5 VDC

12 VDC 12 VDC

24 VDC 24 VDC

Single-winding

latching

G6SU-2F

G6SU-2G

3 VDC

G6SU-2F-TR

G6SU-2G-TR

3 VDC

4.5 VDC 4.5 VDC

5 VDC 5 VDC

12 VDC 12 VDC

24 VDC 24 VDC

G6SU-2F-Y

G6SU-2G-Y

5 VDC

G6SU-2F-Y-TR

G6SU-2G-Y-TR

5 VDC

12 VDC 12 VDC

24 VDC 24 VDC

Double-winding

latching

G6SK-2F

G6SK-2G

3 VDC

G6SK-2F-TR

G6SK-2G-TR

3 VDC

4.5 VDC 4.5 VDC

5 VDC 5 VDC

12 VDC 12 VDC

24 VDC 24 VDC

1. Relay Function

None : Single-side stable

U : Single-winding latching

K : Double-winding latching

2. Number of poles/

Contact form

2: 2-pole/DPDT (2c)

G6S@-@@-@

1234

3. Terminal Shape

None : PCB terminals

F : Outside-L surface mounting terminals

G : Inside-L surface mounting terminals

4. Approved Standards

None : UL, CSA

Y : UL, CSA, BSI (EN62368-1)

■Application Examples

• Telecommunication equipment

• Measurement devices

• Office automation machines

• Audio-visual products.

• Security equipment

• Building automation equipment

• Industrial equipment

• Amusement equipment

• Home appliances

Rated coil voltage

Summary of content (9 pages)

PAGE 1
G6S Surface-mounting Relay Compact, Industry-Standard 2-pole relay, designed to switch 2A Signal Loads. • Long terminals for ideal for soldering and mounting reliability. (Surface mounting terminal models) • Space-saving inside-L terminal. (Surface mounting terminal models) • Unique terminal structure, designed to withstand IRS soldering processes.
PAGE 2
G6S Surface-mounting Relay ●PCB Terminal Standard Models Enclosure rating Relay Function Contact form Single-side stable Model G6S-2 Fully sealed Single-winding latching Rated coil voltage Rated coil voltage Rated coil voltage 3 VDC 3 VDC 3 VDC 4.5 VDC 4.5 VDC G6SU-2 5 VDC G6SK-2 12 VDC 12 VDC 24 VDC 24 VDC 24 VDC 12 VDC Minimum packing unit 5 VDC 12 VDC 5 VDC G6S-2-Y Double-winding latching Model 4.
PAGE 3
G6S Surface-mounting Relay ■Characteristics Item Relay Function Single-side Stable Single-winding Latching Double-winding Latching G6S-2, G6S-2F, G6SU-2, G6SU-2F, G6SK-2, G6SK-2F, G6S-2G G6SU-2G G6SK-2G Contact resistance *1 Operate (set) time Release (reset) time Min. set/reset pulse width Insulation resistance *2 75 mΩ max. 4 ms max. 4 ms max. − Between coil and contacts 10 ms 1,000 MΩ min.
PAGE 4
G6S Surface-mounting Relay min. Must operate voltage 500 300 Sample: G6S-2F Number of Relays: 10 pcs Measurement conditions: NO contact - wire-spring relay load at 48 VDC, 120mA (with ARC-killer) NC contact - resistive load at 48 VDC, 60mA Switching frequency: 3,600 operations/h 100 40 Must release voltage 20 max. 50 min. 30 Contact resistance ●Electrical Endurance (Contact Resistance) *1 G6S-2F(G) Contact resistance (mΩ) max.
PAGE 5
G6S Surface-mounting Relay ■Dimensions Single-side Stable G6S-2F G6S-2F-Y Mounting Dimensions (Top View) Tolerance: ±0.1 mm 14.8±0.2 9.2±0.2 2.54 7.3±0.2 5.08 2.54 Orientation mark 2.2 0.65 Terminal Arrangement/ Internal Connections (Top View) 12 10 9 8 1 3 4 5 8 0.25 +0.5 9.2−0.3 0.5 2.54 5.08 2.54 1 Note 1. Each value has a tolerance of ±0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6S-2G G6S-2G-Y Note: Check carefully the coil polarity of the Relay.
PAGE 6
G6S Surface-mounting Relay Double-winding Latching G6SK-2F Mounting Dimensions (Top View) Tolerance: ±0.1 mm 14.8±0.2 7.3±0.2 2.54 2.54 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 5.08 2.54 12 9.2±0.2 0.65 2.2 0.25 1 2.54 2.54 2.54 Note 1. Each value has a tolerance of ±0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6SK-2G 7.3±0.2 1 7 R 3 4 5 6 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 2.54 2.54 5.08 2.54 12 9.
PAGE 7
G6S Surface-mounting Relay ■Tube Packing and Tape Packing Surface mounting terminal (SMT) standard models are shipped in moisture-proof package, and PCB terminal standard types do not require moisture proof packaging and therefore shipped in non-moisture-proof package. Please refer to "Correct Use" for handling after opening moisture-proof packaging for Surface mounting terminal (SMT) models. 2.
PAGE 8
G6S Surface-mounting Relay ■Recommended Soldering Method Temperature (°C) (1) IRS Method (Mounting Solder: Lead) • The thickness of cream solder to be applied should be within a range between 150 and 200 µm on OMRON’s recommended PCB pattern. • In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side.
PAGE 9
G6S Surface-mounting Relay • During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay’s characteristics will be maintained. C A B Dimension A: 1.96 N max. Dimension B: 4.90 N max. Dimension C: 1.96 N max. G 6 S • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.