Datasheet

229
Text
228
Text
Text
Soldering
Preheating
Upper surface of case (peak):
255∞C max.
120 max.
30 max.
250 max.
230
180
150
Relay
terminal
section
Soldering
Preheating
220 to
245
180 to
200
150
90 to 120
20 to 30
Surface-Mounting Signal Relay – G6K
Temperatures indicate the surface temperatures of the PCB.
• The thickness of cream solder to be applied should be within a
range between 150 and 200 µm on OMRON’s recommended
PCB pattern.
• In order to perform correct soldering, it is recommended that the
correct soldering conditions be maintained as shown below on
the left side.
Note: The temperature profile indicates the temperature of the
relay terminal section.
Visually check that the Relay is properly soldered.
Recommended Soldering Method
Correct Soldering
Incorrect Soldering
PCB
Terminal
Solder
Relay
Land
Excessive
amount of
solder
Insufficient
amount of
solder
Model Coil ratings Contact ratings Number of test operations
DPDT G6K-2G(F/P): 3 to 12 VDC 1 A at 30 VDC 6,000
G6K(U)-2G(F/P)-Y: 3 to 24 VDC 0.5 A at 60 VDC
0.3 A at 125 VAC
■
Approved Standards
UL approval: UL (File No. E41515)
CSA approval: C22.2 No.0, No. 14, No. 950 (File No. LR31928)
1. IRS Method (Mounting solder: Lead) 2. IRS Method (Mounting solder: Lead-free)
Time (s)Time (s)
temperature (°C) temperature (°C)
Signal Relays
Surface-Mounting Signal Relay – G6K
Stick Packing
Relays in stick packing are arranged so that the orientation mark
of each Relay is on the left side. Fifty Relays are packed on one
stick.
Be sure not to make mistakes in Relay orientation when mounting
the Relay to the FPCB.
Stick length: 520 mm (stopper not included)
No. of Relays per stick: 50
Tape Packing (Surface-Mounting Terminal Models)
When ordering Relays in tape packing, add the prefix “-TR” to the
model number, otherwise the Relays in stick packing will be
provided.
Tape Type: ETX7200
(EIAJ (Electronic Industrial Association of Japan))
Reel type: RPM-16D (EIAJ)
Relays per Reel: 900
Stick Packing and Tape Packing
Stopper (gray)
Orientation of Relays
Stopper (green)
1. Direction of Relay Insertion
2. Reel Dimensions
3. Carrier Tape Dimensions
Top tape (cover tape)
Carrier tape
Pulling direction
Orientation mark
Pulling direction
G6K-2F, G6K-2F-Y, G6KU-2F-Y
G6K-2G, G6K-2G-Y, G6KU-2G-Y
Emboss tape
Omron 08 Cat 1-302 5/10/07 15:39 Page 228