Datasheet
4
G6K Surface Mounting Relay
G
6
K
■Engineering Data
*1. The test was conducted at an ambient temperature of 23°C.
*2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary
according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use.
●Maximum Switching Capacity ●Durability ●Ambient Temperature vs.
Maximum Coil Voltage
Note: The maximum coil voltage refers to the maximum
value in a varying range of operating power
voltage, not a continuous voltage.
●Ambient Temperature vs. Carry
Current
●Ambient Temperature vs. Must
Operate or Must Release Voltage
G6K-2G (F/P), G6K-2G (F/P)-Y
●Ambient Temperature vs. Must
Set or Must Reset Voltage
G6KU-2G (F/P)-Y
●Shock Malfunction ●Electrical Durability (with Must Operate
and Must Release Voltage)
*1
G6K-2G (F/P), G6K-2G (F/P)-Y
●Electrical Durability
(Contact Resistance)
*1
G6K-2G (F/P), G6K-2G (F/P)-Y
Conditions: Shock is applied in ±X, ±Y, and ±Z
directions three times each with and
without energizing the Relays to check
the number of contact malfunctions.
●Contact Reliability Test
*1, *2
G6K-2G (F/P), G6K-2G (F/P)-Y
●Mutual Magnetic Interference
G6K-2G (F/P), G6K-2G (F/P)-Y
●Mutual Magnetic Interference
G6K-2G (F/P), G6K-2G (F/P)-Y
10 30 50 70 100 300 500 700 1,000
Switching voltage (V)
10
7
5
3
0.1
0.7
1
0.5
0.3
DC resistive load
AC resistive load
Switching current (A)
1,000
500
300
100
50
30
10
5
3
1
0 0.2 0.4 0.6 0.8 1 1.2
Switching current (A)
125 VAC resistive load
Ambient temperature: 23°C
Switching frequency:
1,800 operations/hour
Durability (x10
4
operations)
30 VDC resistive load
Ambient temperature: 23°C
Switching frequency:
1,800 operations/hour
−40 −20 0 20 40 60 80 100
250
200
150
100
50
0
Ambient temperature (°C)
250
200
150
100
50
0
Maximum coil voltage (%)
-40 -20 0 20 40 60 80 100
2.4
2.0
1.6
1.2
0.8
0.4
0
Ambient temperature (°C)
Carry current (A)
100
90
80
70
60
50
40
30
20
10
0
−60 −40 −20 0 20 40 60 80 100
Ambient temperature (°C)
Must operate voltage
Must release voltage
max.
min.
−
X
−
X
min.
On the basis of rated voltage (%)
max.
100
90
80
70
60
50
40
30
−60 −40 −20 0 20 40 60 80 100
Ambient temperature (°C)
Max. estimated value
max.
min.
−
X
On the basis of rated voltage (%)
Z
Z'
Y
Y'
X
X'
200
400
600
800
1,000
1,000
1,0001,000
1,000
800
600
400
200
1,000
Shock directions
Unit: m/s
2
Sample: G6K-2G
Number of Relays: 10 pcs
XX'
De-
energized
Energized
Z
Z'
Y
Y'
0.001 0.01 0.1 1 10 100
100
80
60
40
20
0
max.
min.
max.
min.
Must operate voltage
Must release voltage
Sample: G6K-2G
Number of Relays: 10 pcs
Test conditions: 1 A resistive load at 30 VDC
with an operation rate of 50%
Switching frequency: 1,800 operations/h
On the basis of rated voltage (%)
Operating frequency (x10
3
operations)
0.001 0.01 0.1 1 10 100
Contact resistance
max.
max.
min.
min.
1,000
500
300
100
50
30
10
Contact resistance (m
Ω
)
Operating frequency (x10
3
operations)
Sample: G6K-2G
Number of Relays: 10 pcs
Test conditions: 1 A resistive load
at 30 VDC with an operation rate
of 50%
Switching frequency: 1,800
operations/h
NO contact
NC contact
Sample: G6K-2G
Number of Relays: 10 pcs
Test conditions: 10 μA resistive
load at 10 m VDC with an
operation rate of 50%
Switching frequency: 7,200
operations/h
max.
min.
max.
max.
min.
min.
1,000
500
300
100
50
30
10
0.001 0.01 0.1 1 10 100 1,000
10,000 100,000
NO contact
NC contact
Operating frequency (x10
3
operations)
Contact resistance (m
Ω
)
+30
+20
+10
0
−10
−20
−30
+30
+20
+10
0
−10
−20
−30
Must operate voltage
Must release voltage
Sample
Sample
De-energized
Energized
TestInitial stage
TestInitial stage
Average value
Average value
Change rate on the
basis of initial value (%)
Change rate on the
basis of initial value (%)
+30
+20
+10
0
−10
−20
−30
+30
+20
+10
0
−10
−20
−30
Must operate voltage
Must release voltage
Sample
De-energized
Sample
Energized
Change rate on the
basis of initial value (%)
Change rate on the
basis of initial value (%)
TestInitial stage
TestInitial stage
Average value
Average value