Datasheet

8
G6K Surface Mounting Relay
G
6
K
■Tube Packing and Tape Packing
Surface mounting terminal (SMT) standard models are shipped in moisture-proof package, and PCB terminal standard types do not
require moisture proof packaging and therefore shipped in non-moisture-proof package.
Please refer to "Correct Use" for handling after opening moisture-proof packaging for Surface mounting terminal (SMT) models.
(1) Tube Packing
• Relays in tube packing are arranged so that the orientation
mark of each Relay in on the left side. Fifty Relays are packed
on one tube.
Be sure not to make mistakes in Relay orientation when
mounting the Relay to the PCB.
Tube length: 520 mm (stopper not included)
No. of Relays per tube: 50 pcs
(2) Tape Packing (Surface Mounting Terminal Models)
• When ordering Relays in tape packing, add the prefix “-TR” to
the model number, otherwise the Relays in tube packing will
be provided.
Relays per Reel: 900 pcs
Minimum packing unit: 2 reels (1,800 pcs)
1. Direction of Relay Insertion
2. Reel Dimensions
3. Carrier Tape Dimensions
G6K-2F, G6K-2F-Y, G6KU-2F-Y
G6K-2G, G6K-2G-Y, G6KU-2G-Y
■Recommended Soldering Method
●IRS Method (for Surface-mounting Terminal Relays)
(1) IRS Method (Mounting Solder: Lead)
(2) IRS Method (Mounting Solder: Lead-free)
• The thickness of cream solder to be applied should be within a
range between 150 and 200 μm on OMRON’s recommended
PCB pattern.
• In order to perform correct soldering, it is recommended that
the correct soldering conditions be maintained as shown
below on the left side.
Visually check that the Relay is properly soldered.
Stopper
(gray)
Orientation of Relays
Stopper
(green)
Top tape
(cover tape)
Carrier tape
Embossed
tape
Orientation mark
Pulling
direction
Pulling direction
2
±0.5
17.5
±1.0
21.5
±1.0
21
±0.5
R1
13
±0.2
80 330
16
±0.1
10.35
7.5
±0.1
12
±0.1
8.6
1.75
±0.1
5.6
±0.1
0.4
±0.05
4
±0.1
1.5
+0.1
−0
2
±0.1
16
±0.1
10.6
7.5
±0.1
12
±0.1
6.9
1.75
±0.1
4
±0.1
1.5
+0.1
−0
2
±0.1
0.4
±0.05
10.6
±0.1
5.8
±0.1
R0.3 max.
3° max.
150
Temperature (°C)
220 to 245
180 to 200
Soldering
Preheating
Time (s)
90 to 120 20 to 30
(The temperature profile indicates the temperature on the circuit board.)
230
180
150
Temperature (°C)
Relay terminal
section
250 max.
Preheating
Time (s)
120 max. 30 max.
Soldering
Uppwe surface of case
(peak): 255°C max.
(The temperature profile indicates the temperature on the PCB.)
Heel fillet
is formed
Solder
PCB
Land
Terminal
Insufficient amount
of solder
Excessive amount
of solder
Relay
Correct Soldering Incorrect Soldering