Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G6J-Y, 2CO, DC, 5V, 1A, 173.1Ohm

210

PCB Signal Relay – G6H

211

Text

Surface-Mounting Signal Relay – G6J-Y

Ultra-compact and Slim DPDT Relay

■

ROHS compliant.

■

Dimensions of 5.7 x 10.6 x 9 mm (W x L x H)

represent a reduction of approximately 56% in

mounting area compared with the OMRON

G6S, for higher-density mounting.

■

Dielectric strength of 1,500 VAC and an

impulse withstand voltage of 2,500 V for 2 x

10 µs (conforms to North American Telcordia

specifications (formerly Bellcore)).

■

Conforms to FCC Part 68 (i.e., impulse

withstand voltage of 1,500 V for 10 x 160 µs

between coil and contacts and between

contacts of the same polarity).

■

Single-winding latching models to save

energy.

■

Conforms to UL60950 (File No. E41515)/CSA

C22.2 No. 0, No.14, No. 950 (File No.

LR31928).

Example: G6J-2P-Y-TR 12 VDC

Example: G6J-2P-Y 12 VDC

Rated coil voltage

Note: 1. When ordering, add the rated coil voltage to the model number.

Tape packing

2. When ordering tape packing, add “-TR” to the model number.

Model Number Legend

1. Relay Function

None: Single-side stable relay

U: Single-winding latching relay

3. Terminal shape

P: PCB terminals

123

–

2. Contact form

2: DPDT

FS: Surface-mounting terminals, short

FL: Surface-mounting terminals, long

–

4. Special function

Y: Improved product for soldering heat resistance

Ordering Information

Application Examples

Classification Single-side stable Single-winding latching

DPDT Through-hole terminal G6J-2P-Y G6JU-2P-Y

Surface mount terminal Short G6J-2FS-Y G6JU-2FS-Y

Long G6J-2FL-Y G6JU-2FL-Y

Plastic

sealed

Telephones, communications equipment, measurement devices, office automation machines, audio-visual products.

Be sure since “-TR” is not part of the relay model number, it is not marked on the relay case.

G6J

Signal Relays

CAT. No. K042-E2-06A-X

Omron 08 Cat 1-302 5/10/07 15:39 Page 210

Summary of content (10 pages)

PAGE 1
Omron 08 Cat 1-302 5/10/07 15:39 PCB Signal Relay – G6H Page 210 Text Surface-Mounting Signal Relay – G6J-Y Ultra-compact and Slim DPDT Relay ■ ROHS compliant. ■ Dimensions of 5.7 x 10.6 x 9 mm (W x L x H) Signal Relays represent a reduction of approximately 56% in mounting area compared with the OMRON G6S, for higher-density mounting.
PAGE 2
5/10/07 15:39 Page 212 Surface-Mounting Signal Relay – G6J-Y Text Text Surface-Mounting Signal Relay – G6J-Y Standard Specifications ■ Characteristics Item Contact mechanism: Crossbar twin Ag (Au-alloy contact) Enclosure rating: ■ Plastic-sealed Coil Rating Single-side Stable Relays (G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y) Single-side Stable Relays Single-winding Latching Relays G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y G6JU-2P-Y, G6JU-2FS-Y, G6JU-2FL-Y Contact resistance (See note 1.) 100 mΩ max.
PAGE 3
5/10/07 15:39 Page 212 Surface-Mounting Signal Relay – G6J-Y Text Text Surface-Mounting Signal Relay – G6J-Y Standard Specifications ■ Characteristics Item Contact mechanism: Crossbar twin Ag (Au-alloy contact) Enclosure rating: ■ Plastic-sealed Coil Rating Single-side Stable Relays (G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y) Single-side Stable Relays Single-winding Latching Relays G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y G6JU-2P-Y, G6JU-2FS-Y, G6JU-2FL-Y Contact resistance (See note 1.) 100 mΩ max.
PAGE 4
Page 214 Text Surface-Mounting Signal Relay – G6J-Y 55 33 AC resistive load 11 0.7 0.7 AC resistive load 0.5 0.5 DC resistive load 0.3 0.3 DC resistive load Ambient Temperature vs. Switching Current 250 250 200 200 150 150 Change rate on the basis of initial value (%) 10 10 77 Ambient Temperature vs.
PAGE 5
Page 214 Text Surface-Mounting Signal Relay – G6J-Y 55 33 AC resistive load 11 0.7 0.7 AC resistive load 0.5 0.5 DC resistive load 0.3 0.3 DC resistive load Ambient Temperature vs. Switching Current 250 250 200 200 150 150 Change rate on the basis of initial value (%) 10 10 77 Ambient Temperature vs.
PAGE 6
Page 216 Surface-Mounting Signal Relay – G6J-Y Text 30 25 5.0 Operate bounce time 35 Release bounce time 30 25 20 20 15 15 10 10 5 5 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 Time (ms) 2 2.5 3.0 Terminal Arrangment/ 2.0 10.3 10.6 1.0 Operate voltage 0.0 −1.0 3 5.2 5.7 9 Mounting Dimensions Internal Connections (Bottom View) G6J-2P Orientation mark Tolerance ±0.1 mm Eight, 9 Eight, 0.85-dia. 0.85-dia. holes holes 11 22 33 44 77 66 55 ++ Release voltage 3.2 3.2 3.5 3.5 0.
PAGE 7
Page 216 Surface-Mounting Signal Relay – G6J-Y Text 30 25 5.0 Operate bounce time 35 Release bounce time 30 25 20 20 15 15 10 10 5 5 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 Time (ms) 2 2.5 3.0 Terminal Arrangment/ 2.0 10.3 10.6 1.0 Operate voltage 0.0 −1.0 3 5.2 5.7 9 Mounting Dimensions Internal Connections (Bottom View) G6J-2P Orientation mark Tolerance ±0.1 mm Eight, 9 Eight, 0.85-dia. 0.85-dia. holes holes 11 22 33 44 77 66 55 ++ Release voltage 3.2 3.2 3.5 3.5 0.
PAGE 8
15:39 Page 218 Surface-Mounting Signal Relay – G6J-Y Text Text Surface-Mounting Signal Relay – G6J-Y Stick Packing and Tape Packing IRS Method (for Surface-Mounting Terminal Relays) BB Cross Section 16.0±0.1 2.0±0.1 Temperature (°C) 1. Stick Packing Relays in stick packing are arranged so that the orientation mark of each Relay is on the left side. Always confirm that the Relays are in the correct orientation when mounting the Relays to the PCBs. Recommended Soldering Method +0.1 Ø1.5-0.0 4.0±0.
PAGE 9
15:39 Page 218 Surface-Mounting Signal Relay – G6J-Y Text Text Surface-Mounting Signal Relay – G6J-Y Stick Packing and Tape Packing IRS Method (for Surface-Mounting Terminal Relays) BB Cross Section 16.0±0.1 2.0±0.1 Temperature (°C) 1. Stick Packing Relays in stick packing are arranged so that the orientation mark of each Relay is on the left side. Always confirm that the Relays are in the correct orientation when mounting the Relays to the PCBs. Recommended Soldering Method +0.1 Ø1.5-0.0 4.0±0.
PAGE 10
5/10/07 15:39 Page 220 Surface-Mounting Signal Relay – G6J-Y Text Precautions CORRECT USE Long Term Current Carrying Under a long-term current carrying without switching, the insulation resistance of the coil goes down gradually due to the heat generated by the coil itself. Furthermore, the contact resistance of the Relay will gradually become unstable due to the generation of film on the contact surfaces. A Latching Relay can be used to prevent these problems.