Datasheet

219
Text
218
Text Surface-Mounting Signal Relay – G6J-Y
IRS Method (for Surface-Mounting Terminal Relays)
Note: Temperatures are given for the surface of the terminal.
• The thickness of cream solder to be applied should be
between 150 and 200 µm on OMRON’s recommended PCB
pattern.
• In order to perform correct soldering, it is recommended that
the correct soldering conditions be maintained as shown
below on the left-hand side.
Visually check that the Relay is properly soldered.
Recommended Soldering Method
Surface of the
relay terminal
Temperature (
°
C)
250 max.
230
180
150
Preheating
Time (s)
120 max. 30 max.
Soldering
Top of cover (Peak): 255°C max.
Correct Soldering Incorrect Soldering
PCB
Relay
Terminal
Solder
Land
Insufficient
amount of
solder
Excessive
amount of
solder
■
Approved Standards
UL approval: UL60950 (File No. E41515)
CSA approval: C22.2 No. 60950 (File No. LR31928)
Contact form Coil ratings Contact ratings Number of test operations
DPDT G6J-2P-Y, 2FS-Y, 2FL-Y: 3 to 24 VDC 1 A at 30 VDC 6,000
G6JU-2P-Y, 2FS-Y, 2FL-Y: 3 to 24 VDC 0.5 A at 60 VDC
0.3 A at 125 VAC
Temperature (°C)
Signal Relays
Surface-Mounting Signal Relay – G6J-Y
1. Stick Packing
Relays in stick packing are arranged so that the orientation mark
of each Relay is on the left side.
Always confirm that the Relays are in the correct orientation when
mounting the Relays to the PCBs.
2. Tape Packing (Surface-mounting Terminal Relays)
When ordering Relays in tape packing, add the prefix “-TR” to the
model number, otherwise the Relays in stick packing will be
provided.
Tape type TB2412R (EIAJ (Electronic Industrial
Association of Japan))
Reel type: R24D (EIAJ (Electronic Industrial Association
of Japan))
Relays per reel: 400
Direction of Relay Insertion
Reel Dimensions
BB Cross Section
Stick Packing and Tape Packing
25.5±
0.5
29.5±
1
80
330
R1
A
21 dia.
2±
0.5
13±
0.2 dia.
±
0.5
Enlarged View of Section A
Orientation mark
Pulling direction
Carrier tape
Top tape
(cover tape)
Embossed
tape
Pulling
direction
16.0±0.1
2.0±0.1 4.0±0.1
Ø1.5
+0.1
-0.0
1.75±0.1
13.25±0.1
24.0±0.2
8.4±0.1
10.8±0.1
1.3±0.1
1.1±0.1
0.5±0.1
10.4±0.1
8.3±0.1
2.2±0.1
9.0±0.1
6.0±0.1
4˚±1˚
5˚±0˚
A
A
B
B
Stick length: 555 mm (stopper not included)
No. of Relays per stick: 50
Stopper (grey)
Stopper (green)
Orientation of Relays
AA Cross
Section
Omron 08 Cat 1-302 5/10/07 15:39 Page 218