Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G6E, 1CO, DC, 5V, 3A, 125Ohm

189

Text

188

Text PCB Signal Relay – G6E

Sub-miniature, Sensitive SPDT

Signal Switching Relay

■

ROHS compliant.

■

High sensitivity: 98mW pickup coil power.

■

Impulse withstand voltage meets FCC Part 68

requirements.

■

Fully sealed construction.

■

Unique moving loop armature reduces relay

size, magnetic interference, and contact

bounce time.

■

Single- and double-winding latching types

also available.

Rated coil voltage

Note: When ordering, add the rated coil voltage to the model number.

Example: G4A-1A-E 12 VDC

Model Number Legend

1. Relay Function

None: Single-side stable

U: Single-winding latching

K: Double-winding latching

2. Contact Form

1: SPDT

3. Contact Type

3: Bifurcated crossbar

Ag (Au-clad) contact

9: Bifurcated crossbar

AgNi (Au-clad) contact

4. Enclosure Ratings

4: Fully sealed

5. Terminals

P: Straight PCB

C: Curved tail

6. Special Function

L: Low sensitivity coil (400 mW)

7. Approved Standards

US: UL, CSA certified

8. Special Function

U: For ultrasonically cleanable

9. Rated Coil Voltage

3, 5, 6, 9, 12, 24, 48 VDC

G6E - - - VDC

456 7 89

Ordering Information

Contact form Terminal Single-side stable Single-winding latching Double-winding latching

SPDT Straight terminal G6E-134P-US G6EU-134P-US G6EK-134P-US

Self-clinching G6E-134C-US G6EU-134C-US G6EK-134C-US

terminal

Bifurcated

crossbar

Signal Relays

Engineering Data

Maximum Switching Power Ambient Temperature vs.

Maximum Coil Voltage

Endurance

DC resistive load

Switching current (A)

Maximum coil voltage (%)

Switching voltage (V) Ambient temperature (°C)Switching current (A)

Endurance (x10 operations)

5,000

3,000

1,000

700

500

300

100

resistive

load

125-VAC

resistive

load

24-VDC resistive load

Rated coil voltage

Note: The maximum coil voltage refers to the maxi-

mum value in a varying range of operating

power voltage, not a continuous voltage.

12.5 max.

(12.3)*

7.5 max.

(7.3)*

10 max.

(9.9)

0.5

3.5

0.5

Terminal Arrangement/

Internal Connections

(Bottom View)

Mounting Holes

(Bottom View)

2.54 7.62

(1.07)

(1.11)

Six, 1-dia. holes

5.08+0.1

10.16+0.1

* Average value

Dimensions

Note: 1. All units are in millimetres unless otherwise indicated.

2. Numbers in parentheses are reference values.

3. Tolerance: ±0.1

4. Orientation marks are indicated as follows:

PCB Signal Relay – G5V-1

Long-term Continuously ON Contacts

Using the Relay in a circuit where the Relay will be ON

continuously for long periods (without switching) can lead to

unstable contacts, because the heat generated by the coil itself

will affect the insulation, causing a film to develop on the contact

surfaces. Be sure to use a fail-safe circuit design that provides

protection against contact failure or coil burnout.

Relay Handling

When washing the product after soldering the Relay to a PCB, use

a water-based solvent or alcohol-based solvent, and keep the

solvent temperature to less than 40∞C. Do not put the Relay in a

cold cleaning bath immediately after soldering.

Precautions

CAT. No. K048-E2-02A-X

Omron 08 Cat 1-302 5/10/07 15:39 Page 188

Summary of content (5 pages)

PAGE 1
5/10/07 15:39 Page 188 Text Signal Relay – G6E PCB Text Signal Relay – G5V-1 PCB Engineering Data Sub-miniature, Sensitive SPDT Signal Switching Relay 5,000 3,000 1,000 700 500 300 100 70 50 24-VDC resistive load ■ High sensitivity: 98mW pickup coil power. ■ Impulse withstand voltage meets FCC Part 68 requirements. Rated coil voltage ■ Fully sealed construction. ■ Unique moving loop armature reduces relay size, magnetic interference, and contact bounce time.
PAGE 2
5/10/07 15:39 Page 190 PCB Text Signal Relay – G6E Text Signal Relay – G6E PCB Specifications ■ ■ Coil Ratings Single-side Stable, Bifurcated Crossbar Contact Type Rated voltage 3 VDC Rated current 66.7 mA Coil resistance 45 Ω Coil inductance Armature OFF 0.08 (H) (ref. value) Armature ON 0.06 5 VDC 6 VDC 40 mA 9 VDC 33.3 mA 125 Ω 180 Ω 0.18 22.2 mA 16.7 mA 405 Ω 0.31 0.17 12 VDC 720 Ω 0.62 0.24 8.3 mA 2,880 Ω 1.20 0.50 24 VDC 4.70 0.99 48 VDC 8.3 mA 5,760 Ω 5.35 3.
PAGE 3
5/10/07 15:39 Page 190 PCB Text Signal Relay – G6E Text Signal Relay – G6E PCB Specifications ■ ■ Coil Ratings Single-side Stable, Bifurcated Crossbar Contact Type Rated voltage 3 VDC Rated current 66.7 mA Coil resistance 45 Ω Coil inductance Armature OFF 0.08 (H) (ref. value) Armature ON 0.06 5 VDC 6 VDC 40 mA 9 VDC 33.3 mA 125 Ω 180 Ω 0.18 22.2 mA 16.7 mA 405 Ω 0.31 0.17 12 VDC 720 Ω 0.62 0.24 8.3 mA 2,880 Ω 1.20 0.50 24 VDC 4.70 0.99 48 VDC 8.3 mA 5,760 Ω 5.35 3.
PAGE 4
5/10/07 15:39 Page 192 PCB Text Signal Relay – G6E Text Signal Relay – G6E PCB 5.08 7.62 Engineering Data Endurance AC resistive load AC inductive load (cosf = 0.4) 100,000 50,000 3,000 10,000 5,000 Ambient Temperature vs. Maximum Coil Voltage 30-VDC inductive load (L/R = 7 ms) 30-VDC resistive load 3,000 1,000 500 300 125-VAC resistive load 100 50 Mounting Holes (Bottom View) Tolerance: ±0.1 G6EU-134C-US G6EU-194C-US 5.08 10 max. (9.9) * 16 max. (15.
PAGE 5
/10/07 15:39 Page 192 PCB Text Signal Relay – G6E Text Signal Relay – G6E PCB 5.08 7.62 Engineering Data Endurance AC resistive load AC inductive load (cosf = 0.4) 100,000 50,000 3,000 10,000 5,000 Ambient Temperature vs. Maximum Coil Voltage 30-VDC inductive load (L/R = 7 ms) 30-VDC resistive load 3,000 1,000 500 300 125-VAC resistive load 100 50 Mounting Holes (Bottom View) Tolerance: ±0.1 G6EU-134C-US G6EU-194C-US 5.08 10 max. (9.9) * 16 max. (15.