Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G6A, 2CO, DC, 12V, 2A, 1.44kOhm

111

G6AG6A

Double-winding Latching, Low-sensitivity DPDT Relays

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.

2. Operating characteristics are measured at a coil temperature of 23°C.

3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

■

Contact Ratings

Note: P level: λ

= 0.1 x 10

–6

/operation

This value was measured at a switching frequency of 60 operations/min and the criterion of contact resistance is 50 Ω. This value

may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual op-

erating conditions.

Rated voltage 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC

Rated current 120 mA 79.9 mA 72.5 mA 60 mA 40 mA 30 mA 15 mA 7.5 mA

Coil resistance 25 Ω 56.3 Ω 69 Ω 100 Ω 225 Ω 400 Ω 1,600 Ω 6,400 Ω

Coil inductance

(H) (ref. value)

Set Armature OFF 0.015 0.04 0.05 0.07 0.16 0.28 1.1 4

Armature ON 0.01 0.025 0.035 0.05 0.12 0.2 0.75 2.9

Reset Armature OFF 0.01 0.025 0.035 0.05 0.12 0.2 0.75 2.9

Armature ON 0.015 0.04 0.05 0.07 0.16 0.28 1.1 4

Must operate voltage 70% max. of rated voltage

Must release voltage 70% max. of rated voltage

Max. voltage 150% of rated voltage at 23°C

Power consumption Approx. 360 mW

Item G6A-274P-ST(40)-US

Load Resistive load

(cosφ = 1)

Inductive load

(cosφ = 0.4; L/R = 7 ms)

Rated load 0.5 A at 125 VAC;

2 A at 30 VDC

0.3 A at 125 VAC;

1 A at 30 VDC

Contact material Ag (Au-Alloy)

Rated carry current 3 A

Max. switching voltage 250 VAC, 220 VDC

Max. switching current 2 A 1 A

Max. switching power 125 VA, 60 W 62.5 VA, 30 W

Failure rate (reference value) 0.01 mA at 10 mVDC

Item G6AK-274P-ST(40)-US/G6AU-274P-ST-US