Datasheet

ManualsBrandsOmron Electronic Components ManualsRelaysSignal Relay G6A, 2CO, DC, 12V, 2A, 800Ohm

109

G6A PCB Relay

Fully Sealed Relay with High Impulse

Dielectric for Use in

Telecommunications Equipment

■ High sensitivity can be driven by digital circuits.

■ Horizontal design allows use in 1/2-inch PCB

racks.

■ Impulse withstand voltage meets FCC Part 68

requirements.

■ Relays can be mounted side-by-side due to low

magnetic leakage.

■ Single- and double-winding latching relays also

available.

■ Special models available for low thermoelectro-

motive force.

Ordering Information

Single-side Stable Type

Single-winding Latching Type

Double-winding Latching Type

Model Number Legend

RoHS Compliant

Refer to pages 16 to 17 for details.

FCC

Contact Ag + Au-Alloy

General purpose DPDT G6A-274P-ST-US

Low-sensitivity G6A-274P-ST40-US

Contact Ag + Au-Alloy

General purpose DPDT G6AU-274P-ST-US

Contact Ag + Au-Alloy

General purpose DPDT G6AK-274P-ST-US

Low-sensitivity G6AK-274P-ST40-US

Rated coil voltage

Note: When ordering, add the rated coil voltage to the model number.

Example: G6A-274P-ST-US 12 VDC

. Relay Function

None: Single-side stable

U: Single-winding latching

K: Double-winding latching

2. Contact Form

2: DPDT

3. Contact Type

7: Bifurcated crossbar

Ag (Au-Alloy) contact

4. Enclosure Ratings

4: Fully sealed

5. Terminals

P: Straight PCB

6. Stand-off

ST: Stand-off 0.64 mm

7. Special Function

40: Low-sensitivity (400 mW)

LT: Low thermoelectromotive force

8. Approved Standards

US: UL, CSA certified

9. Rated Coil Voltage

3, 4.5, 5, 6, 9, 12, 24, 48 VDC

G6A - - - VDC

123456789

Summary of content (6 pages)

PAGE 1
PCB Relay G6A Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment ■ ■ ■ ■ ■ ■ High sensitivity can be driven by digital circuits. Horizontal design allows use in 1/2-inch PCB racks. Impulse withstand voltage meets FCC Part 68 requirements. Relays can be mounted side-by-side due to low magnetic leakage. Single- and double-winding latching relays also available. Special models available for low thermoelectromotive force.
PAGE 2
G6A G6A Specifications ■ Coil Ratings General-purpose, DPDT Relays Rated voltage 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC Rated current 66.7 mA 44.6 mA 40 mA 33.3 mA 22.2 mA 16.7 mA 8.3 mA 4.9 mA Coil resistance 45 Ω 101 Ω 125 Ω 180 Ω 405 Ω 720 Ω 2,880 Ω 9,750 Ω Armature OFF 0.07 0.16 0.2 0.29 0.63 1.1 4.5 13.7 Armature ON 0.065 0.14 0.18 0.26 0.57 1.06 4.1 12.5 Coil inductance (H) (ref. value) Must operate voltage 70% max.
PAGE 3
G6A G6A Double-winding Latching, Low-sensitivity DPDT Relays Rated voltage 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC Rated current 120 mA 79.9 mA 72.5 mA 60 mA 40 mA 30 mA 15 mA 7.5 mA Coil resistance 25 Ω 56.3 Ω 69 Ω 100 Ω 225 Ω 400 Ω 1,600 Ω 6,400 Ω Armature OFF 0.015 0.04 0.05 0.07 0.16 0.28 1.1 4 Armature ON 0.01 0.025 0.035 0.05 0.12 0.2 0.75 2.9 Armature OFF 0.01 0.025 0.035 0.05 0.12 0.2 0.75 2.9 Armature ON 0.015 0.04 0.05 0.07 0.16 0.
PAGE 4
G6A ■ G6A Characteristics Contact resistance (See note 1.) 50 mΩ max. Operate (set) time (See note 2.) Single-side stable types: 5 ms max. (approx. 3 ms) Latching types: 5 ms max. (approx. 2.5 ms) Release (reset) time (See note 2.) Single-side stable types: 3 ms max. (approx. 1.2 ms) Latching types: 5 ms max. (approx. 2.5 ms) Min. set/reset signal width 10 ms min. Max.
PAGE 5
G6A G6A Engineering Data Maximum Switching Power Ambient Temperature vs. Maximum Coil Voltage 250 5.0 Switching current (A) DC resistive 2.0 AC resistive 1.0 0.5 AC inductive (cosf = 0.4) 0.
PAGE 6
G6A G6A Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Orientation marks are indicated as follows: 10.1 max. (9.9)* 20.2 max. (20)* Mounting Holes (Bottom View) Tolerance: ±0.1 Terminal Arrangement/ Internal Connections (Bottom View) G6A-274P-ST(40)-US 1+ 8 4 6 13 11 8.4 max. 0.64 (8.2)* 160.3 7.62 (1.2) 5.08 5.08 (1.2) 7.62 9 (1.2) 3.16 0.6 7.62 (1.2) Eight, 1.0-dia.