Datasheet

Appearance/Dimensions DIP4 type
■ Appearance
■ Dimensions (Unit:mm)
Note: The actual product is marked differently from the
image shown here.
PCB Dimensions (BOTTOM VIEW)
Actual Mounting Pad Dimensions
(Recommended Value, TOP VIEW)
DIP4
932
OMRON logo
Pin 1 mark
Model name
LOT.NO.
DIP (Dual Inline Package)
DIP (Dual Inline Package)
Note: The actual product is marked differently from the image shown here.
* The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold.
Mold pin mark *
4.58±0.25
6.4±0.25
2.54±0.25
1.2±0.15
0.5±0.1
0.8±0.25
7.62±0.25
7.85 to 8.80
3.65
0.25
2.5 min.
+0.15
-0.25
+0.1
-0.05
PCB Terminals
Weight: 0.25 g
4.58 ±0.25
6.4 ±0.25
2.54 ±0.25
1.2 ±0.15
7.62 ±0.25
10.0 max.
1.0 min.
3.65 4.0
1.0 min.
+0.15
-0.25
+0.25
-0.2
Surface-mounting Terminals
Weight: 0.25 g
Four, 0.8-dia. holes
2.54
2.54
(0.61)
(0.61)
(1.52)(1.52)
8.3 to 8.8
2.54
1.5
1.3
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Cat. No. K143-E1-01
0412(0412)(O)
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb