Datasheet

ManualsBrandsOmron Electronic Components ManualsMOSFET RelaysModular MOSFET Relay G3VM, Module, 1CO, 20V, 200mA

G3VM-26M10/26M11/66M

MOS FET Relay Module

MOS FET Relay in module package

with SPDT

• This model of operated by voltage (Rated input voltage is 5 VDC.)

• Contribute to reduce the mounting space on the print circuit board

by small package

• Contact form SPDT

• Surface-mounting

Application Examples

Ordering Information

* The AC peak and DC value are given for the load voltage and continuous load current.

RoHS Compliant

Package (Unit: mm) Model Number Legend

Package type Contact form Terminals

Rated input voltage

Load voltage

(peak value) *

Continuous load current

(peak value) *

Model

Minimum

package

quantity

Vcc VCBIT Ta=25°C Ta=80°C

Module SPDT

Surface-

mounting

Terminals

5 VDC 5 VDC

20 V 200 mA 90 mA G3VM-26M10

50 pcs/tube20 V 1,000 mA 450 mA G3VM-26M11

60 V 400 mA 160 mA G3VM-66M

• Semiconductor test equipment

5±0.3

10±0.3

11 ±0.3

G3VM-@ @ @ @

1234

1. Load Voltage

2: 20 V

6: 60 V

3. Package

M: Module

2. Contact form

6: SPDT

Note: See Device

Function Modes

on the page 4.

4. Other informations

10: Low C

OFF type

11: Low R

ON type

Summary of content (8 pages)

PAGE 1
G3VM-26M10/26M11/66M MOS FET Relay Module MOS FET Relay in module package with SPDT • This model of operated by voltage (Rated input voltage is 5 VDC.) • Contribute to reduce the mounting space on the print circuit board by small package • Contact form SPDT • Surface-mounting RoHS Compliant Application Examples • Semiconductor test equipment Package Model Number Legend (Unit: mm) G 3 V M -@ @ @ @ 1 2 3 4 1. Load Voltage 2: 20 V 6: 60 V 11 ±0.3 10±0.3 5±0.3 2. Contact form 6: SPDT 3.
PAGE 2
G3VM-26M10/26M11/66M MOS FET Relay Module Absolute maximum rating(Ta=25°C) Item Symbol VCC Input Rated input voltage VCBIT Output Rating G3VM-26M10 G3VM-26M11 Unit G3VM-66M Minimum 4.8 V Maximum 5.2 V Minimum 4.5 V Maximum 5.
PAGE 3
G3VM-26M10/26M11/66M MOS FET Relay Module Engineering Data IINPUT - Ta Continuous load current(mA) Input current (mA) Io = Continuous load current Vcc = 5V DC 7.0 -20 0 20 40 Io - Ta (Average value) 8.0 6.0 -40 ● Continuous load current vs. Ambient Temperature 60 80 100 120 1,200 1,100 1,000 900 800 700 600 500 400 300 200 100 0 -30 ● Output terminal capacitance vs. Load voltage G3VM-66M COFF - VOFF (Peak value) Output terminal capacitance COFF/COFF(0V) ● Input current vs.
PAGE 4
G3VM-26M10/26M11/66M MOS FET Relay Module ●Device Functional Modes * INPUT C BIT LOAD PIN1 PIN2 PIN3 PIN4-5 PIN6-5 H L H ON OFF H L L OFF ON L L X OFF OFF * H: 5 V, L: 0 V, X: don’t care ●Timing Diagram ●Measurement Circuit 5 µs VCC 5 µs 1 6 2 5 3 4 RL1 5 µs RL2 90% VCBIT 10% Note: The number from 1 to 6 are the pin numbers in the image shown here.
PAGE 5
G3VM-26M10/26M11/66M MOS FET Relay Module Appearance / Terminal Arrangement / Internal Connections ●Appearance 6 Model name 5 ●Actual Mounting Pad Dimensions (TOP VIEW) No input voltage between Vcc-Gnd 4 1 Vcc 0V G3VM-66M 6 Pin 1 mark 1 2 3 2 GND VCC : 5VDC CBIT : 5VDC LOAD : 60Vpeak Lot No. Switching Circuit 5 3 CBIT Lot No.
PAGE 6
G3VM-26M10/26M11/66M MOS FET Relay Module Safety Precautions Caution Precautions for Correct Use Always turn OFF the power supply before performing wiring. Not doing so may cause electrical shock. (1) Derating design Consideration for derating is critical for achieving required system reliability. Attention should be paid for derating against maximum rating and recommended operating conditions. In addition to this, there should be enough margin based on machine and environmental conditions.
PAGE 7
G3VM-26M10/26M11/66M 4) Dip cleaning, shower cleaning, and steam cleaning are performed by chemical action of solvent. Consider immersion time in solvent and steam within 1 minute at liquid temperature of 50°C or less, taking into consideration influence on MOS FET relay. 5) Dry thoroughly after cleaning so that there is no residue of cleaning solution.
PAGE 8
G3VM-26M10/26M11/66M MOS FET Relay Module • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.