Datasheet

Internal Circuit
T erminal No. Name
V Power supply
(Vcc)
O Output (OUT)
G Ground (GND)
V
G
O
Recommended Mating Connectors:
Tyco Electronics AMP 175778-3 (crimp-type connector)
173977-3 (press-fit connector)
Dimensions Tolerance
3 mm max. ±0.3
3 t mm v 6 ±0.375
6 t mm v 10 ±0.45
10 t mm v 18 ±0.55
18 t mm v 30 ±0.65
Unless otherwise specified, the
tolerances are as shown below .
Note: The asterisked dimen-
sion
is specified by datum
A only .
Post header
175489-3 (Tyco Electronics AMP)
(2.4),
Aperture
width
0.5,
Aperture width
186
Photomicrosensor
(Transmissive)
EE-SX3239-P2/-SX4239-P2
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Features
• Snap-in mounting model.
• Mounts to 1.0-, 1.2- and 1.6-mm-thick panels.
• High resolution with a 0.5-mm-wide sensing aperture.
• With a 5-mm-wide slot.
• Photo IC output signals directly connect with C-MOS and
TTL.
• Connects to T yco Electronics AMP’ s CT -series connectors.
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Rated
value
Power supply voltage V
CC
7 V
Output voltage V
OUT
28 V
Output current I
OUT
16 mA
Permissible output
dissipation
P
OUT
250 mW
(see note)
Ambient
temperature
Operating Topr –20° C to
75°C
p
Storage Tstg –40° C to
85°C
Soldering temperature Tsol ---
Note: Refer to the temperature rating chart if the ambient
temperature exceeds 25°C.
Electrical and Optical Characteristics (Ta = 25°C, V
CC
= 5 V ±10%)
Item Symbol Value Condition
Current consumption I
CC
16.5 mA max. With and without incident
Low-level output voltage V
OL
0.35 V max. I
OUT
= 16 mA
without incident (EE-SX3239-P2),
with incident (EE-SX4239-P2)
High-level output voltage V
OH
(V
CC
x 0.9) V min. V
OUT
= V
CC
with incident (EE-SX3239-P2),
without incident (EE-SX4239-P2), R
L
= 47 k Ω
Response frequency f 3 kHz min. V
OUT
= V
CC
, R
L
= 47 k Ω (see note)
Note: The value of the response frequency is measured by
rotating
the disk as shown below .
2.1 mm
0.5 mm
0.5 mm
t = 0.2 mm
Disk