Datasheet

ManualsBrandsOmron Electronic Components ManualsOptical DetectorsFork Light Barrier 5mm Chassis 940nm

Photomicrosensor (Transmissive)

EE-SX3173/4173-P Series

Built-in Photomicrosensor

Connector Type

• Mounted with M3 screws

• 5 VDC and 24 VDC power supply types are available

• Photo IC output (Dark-ON/Light-ON)

• Connector with secure lock compatible with JST GHR-03

• Equipped with a Zener diode, which increases noise immunity

(for EE-SX3173/4173-P3-Z only)

• Connector with cable is also available (order separately)

EE-5002 1M (Refer to page 7.)

Features

Models available

Power supply voltage: In addition to the conventional 5 VDC supply,

model also available with 24 VDC supply best for large devices

Mounting: New model available with M3 screws

Downsizing

Smallest class in the industry *: Downsizing of products with unique

optical elements is realized

* As of August 2018, according to research by our company

Environment resistance

Connection: Equipped with connectors with locks for resistance

against vibration and shock

Be sure to read Safety Precautions on page 4.

Board

Compatible with 24 VDC !

3.2 dia.

3.2

14.7

14.8

13.6

Application Examples

Packaging Machine Analysis and Measurement Equipment Printing Equipment ATM

Summary of content (9 pages)

PAGE 1
Photomicrosensor (Transmissive) EE-SX3173/4173-P Series Built-in Photomicrosensor Connector Type • Mounted with M3 screws • 5 VDC and 24 VDC power supply types are available • Photo IC output (Dark-ON/Light-ON) • Connector with secure lock compatible with JST GHR-03 • Equipped with a Zener diode, which increases noise immunity (for EE-SX3173/4173-P3-Z only) • Connector with cable is also available (order separately) EE-5002 1M (Refer to page 7.) Be sure to read Safety Precautions on page 4.
PAGE 2
EE-SX3173/4173-P Series Model Number Structure E E -S X@ @@ @-P @-@ (1) (2) (3) (4) (5) (6) (7) (1) Sensing method X: Transmissive (2) Operating mode 3: Dark-ON 4: Light-ON (3) Structure 1: Standard structure (5) Appearance 3: L-shaped mounting (6) Power supply voltage 2: 5 VDC 3: 24 VDC (7) Protection circuit Z: Available (4) Mounting screw size 7: M3 Ordering Information Sensing method Appearance Connecting method Transmissi ve (slot type) 14.
PAGE 3
EE-SX3173/4173-P Series Engineering Data (Reference Value) Fig 1. Output Allowable Dissipation vs. Ambient Temperature Characteristics Output allowable dissipation Pout (mW) 100 80 60 40 20 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (ºC) Fig 2. Sensing Position Characteristics Fig 3. Sensing Position Characteristics Fig 4. Repeated Sensing Position (Typical) (Typical) Characteristics d1 = 0±0.3 mm d2 = 0±0.
PAGE 4
EE-SX3173/4173-P Series Safety Precautions To ensure safe operation, be sure to read and follow the Instruction Manual provided with the sensor. Connection without a Load WARNING If the power supply is connected directly without a load, the internal elements may explode or burn. Be sure to insert a load when connecting the power supply. This product cannot be used as a safety device for press machines or for protecting the safety of persons.
PAGE 5
EE-SX3173/4173-P Series Precautions for Correct Use Mounting Voltage Output 1. This product is intended to be built into devices so no special measures have been taken against external light interference. When using a DC light sensor in an area exposed to an incandescent lamp or other external light interference, it should be mounted so that the effects of external light interference can be avoided. 2. Mount the sensor securely on a flat surface. 3.
PAGE 6
EE-SX3173/4173-P Series Handling during Wiring 1. If a force is applied to the connection area between the terminal and connector by bending or pulling the cable after the wiring is completed, the connector contact part or connection area with the cable may be damaged, resulting in contact failure. Make sure that a stress (external force) as shown in the figure below is not applied to the connection area between the terminal and connector when routing and connecting cables or harnesses.
PAGE 7
EE-SX3173/4173-P Series Dimensions and Internal Circuit (Unit: mm) Photomicrosensor EE-SX3173-P3-Z EE-SX4173-P3-Z EE-SX3173-P2 EE-SX4173-P2 7 4 3.2 dia. 3.2 (7.5) 6.5 (14.8) 8.3 13.6 12.4 5 (Aperture width) 0.5 5.6 2.7 Mark surface (Brand mark, model, lot) 2.7 Optical axis A 1.4 6.4 8.4 7.5 Aperture size (H × W) (14.7) Emitter Detector 1.4 × 1.4 1.4 × 0.5 (13.2) 6.3 2.
PAGE 8
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).
PAGE 9
Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2018 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice.