Datasheet

EE-SX3162/3163/3164-P EE-SX4162/4163/4164-P
3
Safety Precautions
To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly. Do not
use it for such purposes.
Do not use the product with a voltage or current
that exceeds the rated range.
Applying a voltage or current that is higher than the rated range may
result in explosion or fire.
Do not miswire such as the polarity of the power
supply voltage.
Otherwise the product may be damaged or it may burn.
Do not short-circuit the load.
Otherwise explosion or burning may occur.
This product does not resist water. Do not use
the product in places where water or oil may be
sprayed onto the product.
Do not use the product in atmospheres or
environments that exceed product ratings.
Dispose of this product as industrial waste.
Dimensions and Internal Circuit (Unit: mm)
Photomicrosensor
CAUTION
Precautions for Safe Use
Precautions for Correct Use
6
(4.5)
Optical axis
2.7
13
11.6
7.5
8.3
4.5 5
(7)
6.4
(14)
A
A
Aperture width
(3) (1)(2)
Manufactured by JST
Recommended Mating Connectors:
JST (Japan Solderless Terminal) GHR-03
2
16
11
8.3
5.6
2.5
5
Cross section view A-A
(Detector side)
1.4
0.5
2.5 dia.
2-R1.55
Marked surface
(brand, model number,
and lot)
V
O
G
V
O
G
EE-SX3162-P1
EE-SX3162-P1-Z
EE-SX4162-P1
EE-SX4162-P1-Z
EE-SX3162-P2
EE-SX4162-P2
Internal Circuit
Unless otherwise specified, the
tolerances are as shown below.
Note: Dimensions in
parentheses are for
reference only.
Dimensions Tolerance
3 mm max. ±0.2
3 < mm  6 ±0.24
6 < mm  10 ±0.29
10 < mm  18 ±0.35
18 < mm  30 ±0.42
Terminal No. Name
(1) Ground (GND)
(2) Output (OUT)
(3) Power supply (V
CC)
Aperture size (H × W)
Emitter Detector
1.4 × 1.4 1.4 × 0.5
Note: Only with models ending in -Z.