Datasheet

3
EE-SX1330
Safety Precautions
To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly. Do not
use it for such purposes.
Do not use the product with a voltage or current
that exceeds the rated range.
Applying a voltage or current that is higher than the rated range may
result in explosion or fire.
Do not miswire such as the polarity of the power
supply voltage.
Otherwise the product may be damaged or it may burn.
This product does not resist water. Do not use
the product in places where water or oil may be
sprayed onto the product.
Do not use the product in atmospheres or
environments that exceed product ratings.
This product is for surface mounting. Refer to
Soldering Information, Storage and Baking for
details.
Dispose of this product as industrial waste.
Dimensions and Internal Circuit (Unit: mm)
Photomicrosensor
CAUTION
Precautions for Safe Use
Precautions for Correct Use
1
3.5
3 ±0.2 1.5
5
B
BA
A
2.2
1.6 1.6
1
R0.3
2.2
1.6 1.6
1
R0.3
(4)(1)
(2) (3)
6
4
2 2 4
0.6
1.6
1.6
0.3 ±0.15
1
1
1.4
1
1.4
(6xC0.2)
Emitter side
Detector side
2.0 mm dia. or 0.5 mm recess (MAX)
Ejector pin, gate mark, or flat surface
Cross section view B-B
(Emitter side)
Terminals are exposed
in the end face of the board
Optical axis
Terminals are exposed
in the end face of the board
Marking
(upper: model, lower: lot No.)
Cross section view A-A
(Detector side)
(0.4) (0.4)
EE-SX1330
Aperture size (H x W)
Emitter Detector
1.4×1.4 1×0.3
(3)
(1)
(2)
(4)
Internal circuit
Terminal No. Name
(1) Anode
(2) Cathode
(3) Emitter
(4) Collector
Unless otherwise specified, the tolerances are ±0.2 mm.