Datasheet

2
D2F Ultra Subminiature Basic Switch
D
2
F
Contact Form
●SPDT
Contact Specifications
* Please refer to "Using Micro Loads" in "Precautions" for more information
on the minimum applicable load.
Ratings
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 30 operations/min
Approved Safety Standard
The items shown in the "List of Models" above are not standard approved models.
Consult your OMRON sales representative for specific models with standard approvals.
UL (UL1054) /CSA (CSA C22.2 No.55)
Characteristics
Hinge roller
lever
PCB terminals (Standard) D2F-L2 D2F-FL2 D2F-01L2 D2F-01FL2
Self-clinching PCB terminals D2F-L2-T D2F-FL2-T D2F-01L2-T D2F-01FL2-T
PCB terminals (Right-angled) D2F-L2-A D2F-FL2-A D2F-01L2-A D2F-01FL2-A
PCB terminals (Left-angled) D2F-L2-A1 D2F-FL2-A1 D2F-01L2-A1 D2F-01FL2-A1
Solder terminals D2F-L2-D3 D2F-FL2-D3 D2F-01L2-D3 D2F-01FL2-D3
Compact solder terminals D2F-L2-D D2F-FL2-D D2F-01L2-D D2F-01FL2-D
Simulated roller
lever (R1.3)
PCB terminals (Standard) D2F-L3 D2F-FL3 D2F-01L3 D2F-01FL3
Self-clinching PCB terminals D2F-L3-T D2F-FL3-T D2F-01L3-T D2F-01FL3-T
PCB terminals (Right-angled) D2F-L3-A D2F-FL3-A D2F-01L3-A D2F-01FL3-A
PCB terminals (Left-angled) D2F-L3-A1 D2F-FL3-A1 D2F-01L3-A1 D2F-01FL3-A1
Solder terminals D2F-L3-D3 D2F-FL3-D3 D2F-01L3-D3 D2F-01FL3-D3
Compact solder terminals D2F-L3-D D2F-FL3-D D2F-01L3-D D2F-01FL3-D
Simulated roller
lever (R2.5)
PCB terminals (Standard) D2F-L30 D2F-FL30 D2F-01L30 D2F-01FL30
Self-clinching PCB terminals D2F-L30-T D2F-FL30-T D2F-01L30-T D2F-01FL30-T
PCB terminals (Right-angled) D2F-L30-A D2F-FL30-A D2F-01L30-A D2F-01FL30-A
PCB terminals (Left-angled) D2F-L30-A1 D2F-FL30-A1 D2F-01L30-A1 D2F-01FL30-A1
Solder terminals D2F-L30-D3 D2F-FL30-D3 D2F-01L30-D3 D2F-01FL30-D3
Compact solder terminals D2F-L30-D D2F-FL30-D D2F-01L30-D D2F-01FL30-D
Ratings 3 A 1 A 0.1 A
Maximum Operating Force (OF)
General Purpose
1.47 N {150 gf}
Low Operating Force
0.74 N {75 gf}
General Purpose
1.47 N {150 gf}
Low Operating Force
0.74 N {75 gf}
Actuator Te rm inals
COM NO NC
Item Model D2F models D2F-01 models
Contact
Specifications Crossbar
Material Silver alloy Gold alloy
Gap (standard value) 0.25 mm
Minimum applicable load (see note) * 100 mA at 5 VDC 1 mA at 5 VDC
Model
Maximum Operating
Force (OF)
Rated voltage
D2F models D2F-01 models
1.47N (General-purpose) 0.74N (Low Operating Force) 1.47N (General-purpose) 0.74N (Low Operating Force)
Resistive load
125 VAC 3 A 1 A -
30 VDC 2 A 0.5 A 0.1 A
Rated voltage Model D2F (General-purpose) D2F (Low operating force) D2F-01
125 VAC 3 A 1 A -
30 VDC 2 A 0.5 A 0.1 A
Item Model D2F-01 models D2F-F models D2F models
Permissible operating speed
Pin plunger models: 1 mm to 500 mm/s,
Lever models: 5 mm to 500 mm/s
Permissible
operating
frequency
Mechanical
Pin plunger models: 200 operations/min,
Lever models: 100 operations/min
Electrical 30 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value) 100 mΩ max. 50 mΩ max. 30 mΩ max.