Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2F, 100mA, 1CO, 1.47N, Roller Lever

D2F

Ultra Subminiature Basic Switch

Ultra Subminiature Basic

Switch with plenty of

terminal variations

● Incorporating a snapping mechanism made with

two highly precise split springs that ensures long

durability.

● Using insertion molded terminals

that prevents flux penetration.

● In addition to self-clinching PCB, left-angled,

right-angled terminals,

2 types of soldering terminals are available.

RoHS Compliant

Model Number Legend

List of Models

Ratings 3 A 1 A 0.1 A

Maximum Operating Force (OF)

General Purpose

1.47 N {150 gf}

Low Operating Force

0.74 N {75 gf}

General Purpose

1.47 N {150 gf}

Low Operating Force

0.74 N {75 gf}

Actuator Terminals

Pin plunger PCB terminals (Standard) D2F D2F-F D2F-01 D2F-01F

Self-clinching PCB terminals D2F-T D2F-F-T D2F-01-T D2F-01F-T

PCB terminals (Right-angled) D2F-A D2F-F-A D2F-01-A D2F-01F-A

PCB terminals (Left-angled) D2F-A1 D2F-F-A1 D2F-01-A1 D2F-01F-A1

Solder terminals D2F-D3 D2F-F-D3 D2F-01-D3 D2F-01F-D3

Compact solder terminals D2F-D D2F-F-D D2F-01-D D2F-01F-D

Hinge lever PCB terminals (Standard) D2F-L D2F-FL D2F-01L D2F-01FL

Self-clinching PCB terminals D2F-L-T D2F-FL-T D2F-01L-T D2F-01FL-T

PCB terminals (Right-angled) D2F-L-A D2F-FL-A D2F-01L-A D2F-01FL-A

PCB terminals (Left-angled) D2F-L-A1 D2F-FL-A1 D2F-01L-A1 D2F-01FL-A1

Solder terminals D2F-L-D3 D2F-FL-D3 D2F-01L-D3 D2F-01FL-D3

Compact solder terminals D2F-L-D D2F-FL-D D2F-01L-D D2F-01FL-D

D2F -

@@@@

1. Ratings

None : 125 VAC 3A

125 VAC 1A (Low operating force)

01 : 30 VDC 0.1A

2. Maximum Operating Force (OF)

None : 1.47 N {150 gf}

F : 0.74 N {75 gf}

Note. The given values are for pin plunger models only.

3. Actuator

None : Pin plunger

L : Hinge lever

L2 : Hinge Roller Lever

L3 : Simulated roller lever (R1.3)

L30 : Simulated roller lever (R2.5)

4. Terminals

None : PCB terminals (Straight)

-T : Self-clinching PCB terminals

-A : PCB terminals (Right-angled)

-A1 : PCB terminals (Left-angled)

-D3 : Solder terminals

-D : Compact solder terminals

2 3 4

Summary of content (6 pages)

PAGE 1
D2F Ultra Subminiature Basic Switch Ultra Subminiature Basic Switch with plenty of terminal variations ● Incorporating a snapping mechanism made with two highly precise split springs that ensures long D 2 F durability. ● Using insertion molded terminals that prevents flux penetration. ● In addition to self-clinching PCB, left-angled, right-angled terminals, 2 types of soldering terminals are available. RoHS Compliant Model Number Legend 1 @ 2 @ 3 @ 4 D2F - @ 1.
PAGE 2
D2F Ultra Subminiature Basic Switch Ratings Maximum Operating Force (OF) Actuator Terminals Hinge roller lever D 2 F Simulated roller lever (R1.3) Simulated roller lever (R2.5) 3A 1A General Purpose 1.47 N {150 gf} Low Operating Force 0.74 N {75 gf} 0.1 A General Purpose 1.
PAGE 3
D2F Ultra Subminiature Basic Switch Item Model Dielectric strength Vibration resistance * 1 D2F-01 models 600 VAC 50/60 Hz for 1min 1,500 VAC 50/60 Hz for 1min Between each terminal and non-current-carrying metal parts 1,500 VAC 50/60 Hz for 1min Malfunction 10 to 55 Hz, 1.5-mm double amplitude 1,000 m/s2 {approx. 100G} max. 300 m/s2 {approx. 30G} max.
PAGE 4
D2F Ultra Subminiature Basic Switch Dimensions (Unit: mm) /Operating Characteristics The following illustrations and drawings are for D2F models with PCB terminals (straight). Self-clinching, solder, compact solder, and right-angled, left angled terminals are omitted from the following drawings. Refer to the previous page for these terminals. When ordering, replace @ with the code for the terminal that you need. See the "List of Models" for available combinations of models.
PAGE 5
D2F Ultra Subminiature Basic Switch ●Hinge Roller Lever Models D2F-L2@ D2F-01L2@ D2F-FL2@ D2F-01FL2@ 12.8 4 (10) A 4.8 dia.×2.8 *2 (4.6) Operating Force Releasing Force OF Max. RF Min. Overtravel OT Min. Movement Differential MD Max. t=0.3 *1 4 Model D2F-L2@ D2F-01L2@ Operating Characteristics FP Free Position Operating Position OP D2F-FL2@ D2F-01FL2@ 0.78 N {80 gf} 0.05 N {5 gf} 0.39 N {40 gf} 0.02 N {2 gf} 0.55 mm 0.5 mm 0.55 mm 0.5 mm FP Max. OP 16.5 mm 13±2 mm D 2 F *1.
PAGE 6
D2F Ultra Subminiature Basic Switch D 2 F • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.