Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesMicro Switch D2F, 100mA, 1CO, 1.47N, Hinge Lever

D2F

Ultra Subminiature Basic Switch

Subminiature Size Ideal for PCB

Mounting (12.8×6.5×5.8 (W×H×D))

■ Incorporating a snapping mechanism made with

two highly precise split springs that ensures a

long durability.

■ Using Insertion molded terminals and a two-stage

bottom with different levels prevent flux penetra-

tion.

■ Self-clinching PCB, right-angled, left-angled, and

solder terminals are available.

■ Meets a wide range of applications, including

home appliances, audio equipment, office

machines, and communications equipment.

Ordering Information

■ Model Number Legend

1. Ratings

None: General loads

01: Micro loads (0.1 A at 30 VDC)

2. Maximum Operating Force

None: 1.47 N {150 gf}

F: 0.74 N {75 gf}

Note:These values are for the pin plunger models.

3. Actuator

None: Pin plunger

L: Hinge lever

L2: Hinge roller lever

L3: Simulated roller lever (R1.3)

L30: Simulated roller lever (R2.5)

4. Terminals

None: PCB terminals/straight terminals

-T: Self-clinching PCB terminals

-A: Right-angled PCB terminals

-A1: Left-angled PCB terminals

-D3: Solder terminals

-D: Compact solder terminals

RoHS Compliant

D2F-@@@@

1 2 3 4

Summary of content (6 pages)

PAGE 1
Ultra Subminiature Basic Switch D2F Subminiature Size Ideal for PCB Mounting (12.8×6.5×5.8 (W×H×D)) ■ Incorporating a snapping mechanism made with two highly precise split springs that ensures a long durability. ■ Using Insertion molded terminals and a two-stage bottom with different levels prevent flux penetration. ■ Self-clinching PCB, right-angled, left-angled, and solder terminals are available.
PAGE 2
D2F ■ D2F List of Models Actuator Pin plunger General loads OF max. (see note) General loads PCB terminals 1A General-purpose 1.47 N {150 gf} Low operating force 0.
PAGE 3
D2F ■ D2F Characteristics Operating speed 1mm to 500 mm/s (pin plunger models) Operating frequency Mechanical: Electrical: Insulation resistance 100 MΩ min. (at 500 VDC) Contact resistance (initial value) D2F models: 30 mΩ max. D2F-F models: 50 mΩ max. D2F-01 models: 100 mΩ max.
PAGE 4
D2F D2F Dimensions Note: All units are in millimeters unless otherwise indicated. Terminals ■ PCB Terminals (Standard) 3.15 6.5±0.1 Self-clinching PCB Terminals 1.5 1.5 3.5 3.4 0.4 0.9 5.08 5.08 12.8±0.15 6.5±0.1 3.15 0.9 5.08 5.08 12.8±0.15 5.8±0.15 Right-angled PCB Terminals 1.6±0.15 1.5 2.6±0.2 6.5±0.1 5.08 5.08 12.8±0.15 0.9 5.8±0.15 3.1±0.2 2.6±0.2 3.15 0.4 Solder Terminals 6.5±0.1 5.08 5.08 12.8±0.15 1.5 0.5 6.5±0.1 5.08 5.08 12.8±0.15 5.8±0.15 0.4 3.1±0.2 1.5 2.
PAGE 5
D2F D2F Pin Plunger Models D2F@ D2F-01@ D2F-F@ D2F-01F@ 12.7 1.2 2.2+0.12 0 dia. Model 5.2 A 5 2 +0.12 0 6.5±0.1 3.15 5.7 2.9 PT +0.12 20 dia. holes D2F-F@ D2F-01F@ OF max. 1.47 N {150 gf} 0.74 N {75 gf} RF min. 0.20 N {20 gf} OP PT max. 0.5 mm 1.5 OT min. 0.25 mm 3.5 MD max. 0.12 mm OP 5.5±0.3 mm 0.4 0.9 5.08 5.08 12.8±0.15 0.05 N {5 gf} 5.8±0.15 Hinge Lever Models D2F-L@ D2F-01L@ D2F-FL@ D2F-01FL@ D2F@ D2F-01@ Model 12.8 (10.8) t = 0.
PAGE 6
D2F D2F Simulated Roller Lever Models (R2.5) D2F-L30@ D2F-01L30@ D2F-FL30@ D2F-01FL30@ t=0.3 (see note) 12.7 3.3 R2.5 A OP 5.7 3 FP Model D2F-L30@ D2F-01L30@ D2F-FL30@ D2F-01FL30@ OF max. 0.54 N {55 gf} 0.3 N {31 gf} RF min. 0.04 N {4 gf} 0.02 N {2 gf} OT min. 0.5 mm MD max. 0.5 mm FP max. 12.6 mm OP 9.5±1.0 mm Note: Stainless-steel lever Precautions Refer to General Information.