Datasheet

4
D2FD2F
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■
Terminals
■ Mounting Holes
■ Dimensions and Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The following illustrations and drawings are for D2F models with PCB terminals. Self-clinching, solder, and right-angled, left-
angled terminals are omitted from the following drawings. Refer to page 4 for these terminals. When ordering, replace @ with
the code for the terminal that you need.
4. The operating characteristics are for operation in the A direction ( ).
5.8±0.15
3.1±0.2
2.6±0.2
0.4
1.5
0.9
12.8±0.15
5.08
5.08
6.5±0.1
3.15
Three, 0.8-dia. holes
1.5
2.4
0.4
1.6
3.15
5.08
5.08
12.8±0.15
5.8±0.15
6.5±0.1
3.15
5.08
3.5
1.5
0.9
5.08
12.8±0.15
6.5±0.1
0.4
5.8±0.15
3.15
5.08
5.08
12.8±0.15
6.5±0.1
0.9
3.4
1.5
1.5
5.8±0.15
1.25±0.15
0.4±0.05
1.6±0.15
5.8±0.15
3.1±0.2
2.6±0.2
0.4
1.5
0.9
12.8±0.15
5.08 5.08
6.5±0.1
3.15
PCB Terminals (Standard)
Compact Solder Terminals
Self-clinching PCB Terminals
Right-angled PCB Terminals
Solder Terminals
3.15
5.08
0.4
12.8±0.15
6.5±0.1
0.5
3.5
2
1.5
5.8±0.15
5.08
2.2
1.2
Left-angled PCB Terminals
PCB Mounting Dimensions
(Reference)
2.54
2.54
12.8±0.15
5.08±0.1
5.8±0.15
Three,
1.2 dia. holes
Two , 2-dia. mounting holes
6.5±0.15